Download Print this page
Nomadic 36681 Assembly Instruction

Nomadic 36681 Assembly Instruction

Mercedes sprinter center crossover

Advertisement

Quick Links

Mercedes Sprinter
Center crossover
Plug & Play cable crossover for damping the center speaker
Model/YOM: Sprinter VS30 from 2018 (Type W907 / W910)
Attenuation of the center speaker in the dashboard
Dismantle original cover (see fi g. A)
Lever out loudspeaker (see fi g. B)
Disconnect the purple-white marked cable, insert the cable switch (fi g. C) and reconnect the loudspeaker (see fi g. D).
fi nally reinsert loudspeaker and clip in cover
Notice:
This is not an improvement of the factory speakers, but the possibility of harmonious integration of the center speaker, so that the
factory tweeters and woofers are perceived in the vehicle.
To achieve a sound performance we recommend the 3-way front system or sound package I, which signifi cantly increases the sound
performance of the system due to the additional amplifi er and subwoofer. All sound systems include the crossover for throttling.
JEHNERT Sound Design | Im Michelreis 14 | D-72124 Pliezhausen | Tel. 07127 / 93457-0 | Fax 07127 / 93457-10 | sounddesign@jehnert.de | www.jehnert.de
Assembly instruction
Status: 02.02.20203
Art. No.: 36681
Packing list:
1x cable crossover for center speaker jacketed
A
C
Installation video on
watch youtube:
B
D

Advertisement

loading
Need help?

Need help?

Do you have a question about the 36681 and is the answer not in the manual?

Questions and answers

Summary of Contents for Nomadic 36681

  • Page 1 Assembly instruction Mercedes Sprinter Status: 02.02.20203 Center crossover Art. No.: 36681 Plug & Play cable crossover for damping the center speaker Model/YOM: Sprinter VS30 from 2018 (Type W907 / W910) Packing list: Installation video on watch youtube: 1x cable crossover for center speaker jacketed Attenuation of the center speaker in the dashboard •...
  • Page 2 Assembly instruction Mercedes Sprinter Status: 02.02.20203 Center crossover Art. No.: 36681 Attention: On some vehicles the original Mercedes connectors have been swap- ped. In this case, the connector must be modifi ed as follows: • If the factory speaker connector has a pin on the end of the plug (see fi g. E), carefully separate it with a knife (see fi g. F).