Aiwa XP-Z3C Operating Instructions Manual page 26

PLAYBACK OF MP3 DISCS
3
Press i/k (for album selection) and
r /t (for track selection)
repeatedly to select a track to be
added to the program.
a Selected album number (flashing)
b Selected track number (flashing)
c Program order
4
Press P-MODE/ENT.
The selected track is stored in the
program.
Repeat steps 3 and 4 to program more
tracks.
5
Press e on the unit or c/a on
the remote control to start program
play.
To check the programmed tracks
Press P-MODE/ENT repeatedly before you
proceed to step 5. The number of each
programmed track appears in order of
playback.
To add tracks to the program
Repeat steps 1 to 4 when the PRGM is
appeared while the unit is stopped. Tracks
can be added to the end of the program.
26
ENGLISH
When the 24 tracks are programmed
"P-FULL" appears, and no more tracks can
be added.
To cancel the program play
Press s during programming or while the
program play is stopped.
Note
• Program play is also canceled when the
disc compartment is opened or the auto
power off function turns off the power.
• You cannot go back to a previous track by
holding r pressed during playback.
• Repeat play can be performed during
program play.