Aiwa XP-Z3C Operating Instructions Manual page 12

PLAYBACK OF AUDIO DISC
Basic operation
To stop
To pause
To search for the
beginning of a track
To locate a desired
passage
To locate the track 10 tracks ahead of
the current track (+10 skip)
In Play or Standby mode, press +10 on the
remote control.
Ex. 1: If you press +10 while the unit is
playing the 4th track, the beginning of
the 14th track is located.
Ex. 2: If you press +10 while the unit is
playing the 10th track on a disc
containing 15 tracks, the beginning of
the 5th track is located.
Note
This does not function on the discs having
10 tracks or less.
12
ENGLISH
Press s.
Press e on the unit or
c/a on the remote
control.
To resume, press again.
Press r or t.
Keep r or t
pressed.
Release the button at the
start of desired passage.
Resume function
Set the HOLD/RESUME switch to
RESUME.
You can start playback from the point where
you stopped playback by pressing s.
When the resume function is on, all-track
repeat is selected automatically.
To cancel resume function, set the HOLD/
RESUME switch to OFF.
Note
• Resume play will be canceled if you open
the disc compartment while the unit is
turned on.
Be sure to set the HOLD/RESUME switch
to OFF before changing discs.
• Resume play cannot be functioned during
random play.
OFF