Kodak CD14 - EXTENDED GUIDE Extended User Manual page 47

Picture quality problems
Status
Picture is not clear
Picture is too dark
Picture is too light
www.kodak.com/go/support
Solution
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Clean the lens (see page
■
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■
Reposition the camera for more available light.
■
Use Fill flash (see page
behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page 46.)
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off
■
Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page 46.)
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
48).
7) or change your position so light is not
(see page 7).
Troubleshooting
41