Table of Contents
Advertisement
Printing pictures
Direct printing with a KODAK All-in-One Printer
Your camera is compatible with PICTBRIDGE Technology, so you can print directly to
PICTBRIDGE enabled Printers. You need a camera with fully charged batteries, a
PICTBRIDGE enabled Printer, and a USB cable.
Connecting the camera to a KODAK All-in-One Printer
1 Turn off the printer. Turn on the camera.
2 Connect the appropriate USB cable from the camera to the printer.
The PICTBRIDGE logo is displayed, followed by the current picture and menu. (If no
pictures are found, a message is displayed.) If the menu turns off, press any button to
redisplay it.
3 Highlight a printing option, then press OK.
Current Picture—
Tagged Pictures—
size.
Print thumbnails of all pictures. (This option requires one or more
Index Print—
sheets of paper.) If the printer is capable, choose a print size.
Print all pictures in internal memory or on a card. Choose the
All Pictures—
number of copies.
Image Storage—
NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer
pictures to your computer, see
Purchase cables, accessories
www.kodak.com/go/support
Press
to choose a picture. Choose the number of copies.
Print pictures that you tagged for printing and choose a print
Access Auto or Internal Memory.
page
32.
Transferring, printing, tagging
www.kodak.com/go/CD14accessories
33
Advertisement
Table of Contents
