Troubleshooting - Kodak CAMERA DOCK 3 User Manual

Specifications and notes
Specifications:
Communication with
computer/printer:
DC Voltage Input:
AC Voltage:
Notes: • When the camera is on the dock, it is
• Your AC adapter may have additional plugs.
• Dispose of batteries according to local and
?

Troubleshooting

Problem and Cause
Cannot transfer pictures to
the computer
Software is not installed or is
installed incorrectly.
Camera was docked and
transfer button pressed during
software installation. Camera is
listed as an unknown device.
powered by the dock instead of the camera
battery.
Use the one appropriate for your locality.
national regulations.
USB (cable included with
Kodak EasyShare camera)
5 V DC at 2.0 Amps
110 V to 240 V 50/60 Hz
Solution
(Windows OS-based only)
Disconnect USB cable and
remove camera from dock.
Close all open applications.
Uninstall, then re-install the
software. To uninstall, go to
Start > Settings > Control
Panel > Add/Remove
Programs.
(Windows OS-based only)
Disconnect USB cable and
remove camera from dock.
Delete camera from Device
Manager: Right-click on My
Computer, go to Properties >
Hardware > Device Manager >
Other Devices.
8