Kodak CAMERA DOCK II Quick Start Manual page 2

First!
1
Install Software
BEFORE connecting Camera Dock to computer
KODAK EASYSHARE Software CD
included with camera.
NOTE: Some software installation
unnecessary for MACINTOSH
OS X users. See camera User's
Guide.
2
Install Camera Insert
Use custom camera insert (included with camera).
If unavailable, use universal camera insert (included
with Camera Dock).
To order a custom insert for your camera go to
www.kodak.com/go/accessories.
- 4 -
3
Connect Camera Dock
Leave connected for easy access.
Connect USB Cable
Connect Camera Dock
to Power
Connect AC Adapter* to
Camera Dock. Plug into
wall outlet.
* Your adapter and power
cords may look different.
4
Install Battery Pack
See camera User's Guide for details.
KODAK EASYSHARE Ni-MH Rechargeable
Battery Pack is included with Camera Dock.
- 5 -
5
Charge Battery Pack
Only the KODAK EASYSHARE Ni-MH Rechargeable Battery Pack can be recharged
by the Camera Dock.
Open Connector door.
USB
Turn off camera, place in Camera Dock.
Charging starts immediately and takes
about 2.5 hours.
Battery low
Battery partially charged
Battery fully charged
- 6 -
6
Take Pictures
See camera User's Guide.
7
Transfer Pictures to Computer
Place camera in Camera Dock. Press the Connect button.
Blinking Green = Pictures transferring
8
Store Camera in Camera Dock
Keep your camera charged
and ready to use.
- 7 -