Mercury 350.003UK User Manual

A stylish wireless digital door phone that allows you to talk to your visitors before opening the door. No
wires are required between the outdoor and indoor units, making this system very simple to install. It's
also possible to connect the outdoor unit to an electronic door lock, utilising the door release button on
the indoor unit.
Features:
• Simple wire free installation and setup
• Up to 300m transmission range
• 8 Ringtones and 3 adjustable volume levels
• Weatherproof outdoor unit can be connected to an electronic lock (not supplied)
• Supplied with 2 power supplies, mounting brackets and fixing kits
In the box:
• Outdoor unit (IP44)
• Indoor unit
• UK Power Supply (outdoor unit)
• USB Power Supply (indoor unit)
• 1m USB-C power lead (indoor unit)
Installation:
Outdoor unit
1. Fasten the rain shade on the wall around 1.4~1.7m
above the ground using the screws and plugs
provided in the fixing kit.
2. Connect the 12V DC power supply to the back of
the unit as described in the wiring diagram below.
3. Slot the unit into the rain shade and secure from
underneath using the fixing screw provided in the
fixing kit.
NOTE: it is recommended that all wiring
connections for both the electronic door lock and
12V DC power supply are undertaken by a qualified
electrician.
www.avsl.com
Wireless Digital Door Phone System
Order ref: 350.003UK
• Electronic lock connecting wire
• Rain Shade (outdoor unit)
• Fixing Plate (indoor unit)
• 2pcs Fixing Kit
• User Guide
User Manual
350.003UK User Manual