Kodak 8660 - EXPORT MODULE GUIDE Getting Started Manual page 18

Error Message
The printer cannot scale the image (up or
down) enough to completely fit (fill) the
page! The export module will set the
scaling to the limit of the printer
The selected Kodak printer on ___ is
busy.
Jobs in process, waiting to print: ___
Current job, copies to print: ___
Because of the resolution of the image,
the printer scaling required is below
(above) the limit of the printer.
Various media mismatch messages
There is a problem with the contents of
the file.
Check the file for correct syntax.
For other errors, check all the 8660 printer's connections, and make sure
that the display panel shows the READY prompt. If the problem persists,
restart the 8660 printer and the computer. If you still have trouble, try
reinstalling the export module. The Operator's Guide can also help you to
solve printing problems.
CONTENTS
Indicates that the scaling limits in the
printer were exceeded. The export
module will readjust the scaling to the
limits of the printer.
Indicates the printer is busy and reports
on job status and jobs in queue. The
dialog box closes when the printer
becomes available.
The export module sets the scaling
control to the smallest (largest)
supported value.
The requested print media does not
match the media loaded in the printer.
Follow the instructions in the message to
resolve the problem.
Check your custom package file for the
correct syntax.
Refer to "Troubleshooting."
INDEX SEARCH
Solution
HELP
Operator's Guide
Printing Guide
Color Management
Calibration
Network
Interface Guide
Getting Started
Using the Export
Module for Adobe
Photoshop
About Printer Tables