Advertisement
Transportation Safety Division
Digital Imaging with Durst
163TS Printers on 3M™
Reflective Sheeting
Information Folder 1.19 November 2020
Replaces Information Folder 1.19 Dated July 2018
1 Description
3M™ Diamond Grade™ DG
Reflective Digital Sheeting Series 3930DS are compatible with the Durst Rho 163TS and Durst Rho163TS-HS
printers in combination with 3M™ ElectroCut™ Film 1170C Clear Overlaminate and 3M™ Piezo™ Inkjet Series
8900UV Ink. This compatibility is backed with a
printing guidelines in this document are followed. See the "Limited Warranty" section of this document for more
information on the MCS Warranties.
3M™ Advanced Flexible Engineer Grade Reflective Sheeting Series 7300 is compatible with the Durst Rho 163
printers in combination with 3M ElectroCut Film 1170C Clear Overlaminate and 3M Piezo Inkjet Series 8900UV
Ink, This combination is not covered by the
Traffic colors can be printed with Durst 163TS printers on Series 4000DS and Series 3930DS sheetings using 3M
Piezo Inkjet Series 8900UV Inks. When printed and laminated with 3M ElectroCut Film 1170C Clear
Overlaminate following the guidelines below, these colors are backed by the
Non-regulated signage, which may include process color graphics, may also be printed using Durst 163TS
printers on Series 4000DS and Series 3930DS sheetings using 3M Piezo Inkjet Series 8900UV Inks. When printed
3
Prismatic Reflective Digital Sheeting Series 4000DS and 3M™ High Intensity Prismatic
3M™ MCS™ Warranty
3M MCS Warranty
and
3M MCS Warranty for Traffic
or
3M MCS Warranty for Traffic.
3M MCS Warranty for
when the
Traffic.
Advertisement
Table of Contents
Related Manuals for 3M 163TS
Summary of Contents for 3M 163TS
- Page 1 3M MCS Warranty 3M MCS Warranty for Traffic. Traffic colors can be printed with Durst 163TS printers on Series 4000DS and Series 3930DS sheetings using 3M Piezo Inkjet Series 8900UV Inks. When printed and laminated with 3M ElectroCut Film 1170C Clear...
-
Page 2: Printing Guidelines
In order to achieve proper color and retroreflectivity, both the design software and the RIP software must be set up exactly as specified by 3M. Any sign design software that is able to export a PDF and name spot colors can be used. However, the spot color names used in the sign design software must exactly match those preloaded into the RIP software. - Page 3 Reflective Digital Sheeting Series 3930DS and 3M™ Diamond Grade™ DG Prismatic Reflective Digital Sheeting Series 4000DS will not be covered by the 3M MCS Warranty for Traffic. As previously stated, the MCS Warranty does not apply to 3M™ Advanced Flexible Engineer Grade Reflective Sheeting Series 7300.
- Page 4 CAUTION: When handling any chemical product, read all manufacturers' container labels and the Safety Data Sheets (SDS) for important health, safety, and environmental information. To obtain SDS sheets for 3M products, go to 3M.com/SDS, request by mail, or in case of an urgent need, call 1-800-364-3577.
-
Page 5: Warranty Information
March 2020 6 Disclaimer With the exception of 3M branded products, 3M does not represent that any printer or printer accessory recommended in 3M literature will meet customer requirements, any federal, state, or local regulations, or any applicable safety standards. Such determination is the responsibility of the printer owner. For a buyer's convenience, 3M may provide engineering or technical information, recommendations, certifications, and other information or materials relating to other company's products (“Other Information”), but 3M does not warrant... - Page 6 3M assumes no responsibility for any injury, loss, or damage arising out of the use of a product that is not of our manufacture. Where reference is made in literature to a commercially available product, made by another manufacturer, it shall be the user’s responsibility to ascertain the precautionary measures for its use outlined...
Need help?
Do you have a question about the 163TS and is the answer not in the manual?
Questions and answers