Expansion Slot (Pci Slot) - ASROCK PV530 User Manual

Hide thumbs Also See for PV530:

Table of Contents

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 1 PCI slot and 1 PCI Express slot on this motherboard.

PCI slot is used to install expansion card that has the 32-bit PCI

PCI Slot:

interface.

PCIE Slot: PCIE1 (PCIE x16 slot; Blue) is used for PCI Express x16 lane width

graphics card.

Installing an expansion card

Step 1.

Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2.

Remove the system unit cover (if your motherboard is already installed in

a chassis).

Step 3.

Remove the bracket facing the slot that you intend to use. Keep the

screws for later use.

Step 4.

Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 5.

Fasten the card to the chassis with screws.

Step 6.

Replace the system cover.

1 4

Table of Contents