Guide To Configure Raid 1 - ASROCK P4VT8 User Manual

Hide thumbs Also See for P4VT8:

Table of Contents

2.9.2.2 Guide to Configure RAID 1

Please enter "VIA Tech RAID BIOS Utility" to set RAID 1 configuration.

STEP 1: Boot-up your computer.

STEP 2: During POST press <Tab> key to enter "VIA Tech RAID BIOS

STEP 3: Start the configuration from the option Create Array. Select the

STEP 4: Select the option Array Mode, then press <Enter> key to

STEP 5: Select RAID 1 for data protection from the menu and press

You can find more configuration details in the Support CD. There are three

instruction files to illustrate the three types of configurations step by step.

2 0

Utility".

option Create Array, then press <Enter> key.

display the pop-up menu of RAID system setting.

<Enter>.

5.1

Select the option Select Disk Drives, then press <Enter>. Use

arrow keys to select disk drive(s), then press <Enter> to mark

selected drive. An asterisk is placed before the selected drive.

5.2

Select the option Start Create Process and press <Enter> to

setup hard disk for RAID system. Then the confirmation

message appears:

Press <Y> to confirm or <N> to return to the configuration options.

If you wish to install the SATA hard disks alone without making RAID

setup, please refer to the file in the support CD:

.. \ RAID SETUP \ SATA.PDF

If you wish to install the SATA hard disks and set the array mode as

RAID 0, please refer to the file in the support CD:

.. \ RAID SETUP \ RAID 0.PDF

If you wish to install the SATA hard disks and set the array mode as

RAID 1, please refer to the file in the support CD:

.. \ RAID SETUP \ RAID 1.PDF

Save the data on source disk to

mirror after creation? (Y/N)

Table of Contents