Driver Installation Guide; Amr Card And Driver Installation; Installing Windows 2000 / Xp With Raid Functions; Installing Windows ® 2000 / Xp Without Raid - ASROCK P4VM890 - V2.1 User Manual

Table of Contents

Advertisement

2.10 Driver Installation Guide

2.10
2.10
Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
2.10
2.10
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.11
2.11

AMR Card and Driver Installation

AMR Card and Driver Installation
2.11 AMR Card and Driver Installation
2.11
2.11
AMR Card and Driver Installation
AMR Card and Driver Installation
If you do not insert AMR card to this motherboard, and you finish installing all
drivers to your system now, but in the future, you plan to use AMR card function
on this motherboard, please follow the steps below then.
1. Insert AMR card to AMR slot on this motherboard. Please make sure that the
AMR card is completely seated on the slot.
2. Install AMR card driver from our support CD to your system.
3. Reboot your system.
2.12
2.12
Installing Windows
Installing Windows
2.12 Installing Windows
2.12
2.12
Installing Windows
Installing Windows
If you want to install Windows
HDDs with RAID functions, please follow below steps.
STEP 1: Set up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA driver diskette.
A.
Insert the ASRock Support CD into your optical drive to boot your system.
B.
During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-
ROM as the boot device.
C.
When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D.
Then you will see these messages,
Please insert a blank
formatted diskette into floppy
drive A:
press any key to start
Please insert a floppy diskette into the floppy drive, and press any key.
E.
The system will start to format the floppy diskette and copy SATA drivers
into the floppy diskette.
2000 / XP With RAID Functions
2000 / XP With RAID Functions
2000 / XP With RAID Functions
2000 / XP With RAID Functions
2000 / XP With RAID Functions
®
®
®
2000 / Windows
XP OS on your SATA
Advanced screen
2 2
2 2
2 2
2 2
2 2
IDE Configuration.

Advertisement

Table of Contents
loading

This manual is also suitable for:

P4vm890 - r2.0P4vm890

Table of Contents