HIKVISION Special Series Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. Special Series
  6. Manual
HIKVISION Special Series Manual

HIKVISION Special Series Manual

Smart linkage ptz camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Smart Linkage PTZ Camera

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Special Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION Special Series

Summary of Contents for HIKVISION Special Series

  • Page 1 Smart Linkage PTZ Camera...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 Smart Linkage PTZ Camera PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

  • Page 4: Table Of Contents

    Smart Linkage PTZ Camera Contents Chapter 1 Overview ........................1 1.1 Product Introduction ......................1 1.2 Key Function .......................... 1 1.3 System Requirement ......................2 Chapter 2 Device Activation and Accessing ................. 3 2.1 Activate Device ........................3 2.1.1 Activate Device via Web Browser .................. 3 2.1.2 Activate via SADP ......................
  • Page 5 Smart Linkage PTZ Camera 3.3.3 Picture Settings ......................21 3.4 Multi-Target-Type Detection ....................22 3.4.1 Set Multi-Target-Type Detection in PTZ Channel ............22 3.4.2 Set Multi-Target-Type Detection in Panoramic Channel ..........26 3.5 Smart Event .......................... 29 3.5.1 Set Intrusion Detection ....................29 3.5.2 Set Line Crossing Detection ..................
  • Page 6 Smart Linkage PTZ Camera 4.12 Set Device Position ......................48 4.13 GPS Calibration ........................49 4.13.1 Set GPS Calibration ....................49 4.13.2 Verify Calibration ...................... 50 4.14 Set Power Off Memory ...................... 50 4.15 Set PTZ Priority ........................50 Chapter 5 Live View ........................52 5.1 Live View Parameters ......................
  • Page 7 Smart Linkage PTZ Camera 6.1.7 Video Encoding ......................57 6.1.8 Profile .......................... 59 6.1.9 SVC ..........................59 6.1.10 I-Frame Interval ......................59 6.1.11 Smoothing ......................... 59 6.2 ROI ............................59 6.2.1 Set ROI ........................60 6.2.2 Set Face Tracking ROI ....................60 6.2.3 Set License Plate Tracking ROI ..................
  • Page 8 Smart Linkage PTZ Camera 7.2.1 Record Automatically ....................74 7.2.2 Record Manually ......................75 7.2.3 Playback and Download Video ..................75 7.3 Capture Configuration ......................76 7.3.1 Capture Automatically ....................76 7.3.2 Capture Manually ......................76 7.3.3 View and Download Picture ..................77 Chapter 8 Event and Alarm .......................
  • Page 9 Smart Linkage PTZ Camera 10.3 Port Mapping ........................91 10.3.1 Set Auto Port Mapping ....................91 10.3.2 Set Manual Port Mapping ..................91 10.3.3 Set Port Mapping on Router ..................92 10.4 SNMP ..........................93 10.5 Access to Device via Domain Name ................... 93 10.6 Access to Device via PPPoE Dial Up Connection ..............
  • Page 10 Smart Linkage PTZ Camera 11.11 Security .......................... 101 11.11.1 Authentication ...................... 101 11.11.2 Set IP Address Filter ....................102 11.11.3 Set HTTPS ......................102 11.11.4 Set QoS ........................103 11.11.5 Set IEEE 802.1X ..................... 104 11.11.6 Security Audit Log ....................104 11.11.7 SSH ........................

  • Page 11: Chapter 1 Overview

    Smart Linkage PTZ Camera Chapter 1 Overview 1.1 Product Introduction The Smart Linkage PTZ Camera integrates a fixed panoramic channel with a PTZ channel to offer both an overall view of the monitoring scene and target details. 1.2 Key Function The key functions of the device are as follows.

  • Page 12: System Requirement

    Smart Linkage PTZ Camera 1.3 System Requirement Your computer should meet the requirements for proper visiting and operating the product. Recommended Specifications Operating System Microsoft Windows XP/ Windows 7/ Windows 8/ Windows 10 Mac OS 10.13 or later Intel® Pentium® IV 3.0 GHz or higher 1 G or higher Display 1024 ×...

  • Page 13: Chapter 2 Device Activation And Accessing

    Smart Linkage PTZ Camera Chapter 2 Device Activation and Accessing To protect the security and privacy of the user account and data, you should set a login password to activate the device when access the device via network. Note Refer to the user manual of the software client for the detailed information about the client software activation.

  • Page 14: Activate Via Sadp

    • Get the SADP software from the supplied disk or the official website http:// www.hikvision.com/ , and install the SADP according to the prompts. • The device and the PC that runs the SADP tool should belong to the same subnet.

  • Page 15: Access Device Via Web Browser

    Smart Linkage PTZ Camera 2.2 Access Device via Web Browser Before You Start Check the system requirement to confirm that the operating computer and web browser meets the requirements. Steps 1. Open the web browser. 2. Input IP address of the device to enter the login interface. 3.

  • Page 16: Admin Password Recovery

    Smart Linkage PTZ Camera Operating System Web Browser Operation are restricted. For example, Playback and Picture are not available. For detailed restricted function, refer to the actual device. Note The device only supports Windows and Mac OS system and do not support Linux system. 2.2.2 Admin Password Recovery If you forget the admin password, you can reset the password by clicking Forget Password on the login page after completing the account security settings.
  • Page 17 Smart Linkage PTZ Camera Locking Duration The device releases the lock after the setting duration.

  • Page 18: Chapter 3 Smart Function

    Smart Linkage PTZ Camera Chapter 3 Smart Function 3.1 Person Arming When the device detects the armed face or human body in the monitoring scene, it triggers alarms, and tracks and captures the target. During the tracking, the target location and other related information are uploaded.
  • Page 19 Smart Linkage PTZ Camera 3) Click OK. 4) Optional: Modify a face picture library. Select the desired library and click and change related parameters. 5) Optional: Delete a library. Select the desired library and click 3. Add face pictures to the library. Note The picture format should be JPEG, and the size no larger than 300 K per file.
  • Page 20 Smart Linkage PTZ Camera Steps 1. Go to Configuration → Human Body Library . 2. Create a human body library. 1) Click to add a human body library. 2) Input library name, threshold and remarks. Threshold Human body similarity higher than the set threshold triggers human body picture comparison alarm uploading.
  • Page 21 Smart Linkage PTZ Camera Modeling Select one or more pictures, and click Modeling. Batch Modeling Select a picture library, and click Batch Modeling. 6. Optional: Repeat to create more human body libraries. Set Auto Person Arming Rule Before You Start Complete Multi-Target-Type Detection settings for Camera 01 in advance.

  • Page 22: Manual Person Arming

    Smart Linkage PTZ Camera 2) Select the Library Type as Human Body Library, and select a desired library. 3) Set the arming schedule and linkage method for the selected library. Note The arming schedule and linkage method for different libraries are allowed to set independently.
  • Page 23 Smart Linkage PTZ Camera By Tilt Angle The device calculates the tracking zoom ratio automatically according to the tilt angle of the device. Note The attitude of the device affects the accuracy of this zooming control mode. For the model with a built-in gyroscope, try to calibrate the attitude if some zooming problems happen during tracking.

  • Page 24: Vehicle Arming

    Smart Linkage PTZ Camera 3.2 Vehicle Arming The device detects and tracks designated license plates, and uploads real-time target location and other related information. Note • Select Vehicle Arming on VCA Resource page to show the configuration page. • Target location information can be uploaded only when the GPS calibration is completed. See GPS Calibration for configuration instructions.

  • Page 25: Manual Vehicle Arming

    Smart Linkage PTZ Camera When the network is disconnected, data is temporarily saved on the memory card. When the network connection is resumed, the device automatically uploads the saved data to the arming host, in which case, the arming host IP address is required. Note A memory card should be installed in the device.
  • Page 26 Smart Linkage PTZ Camera Set Arming Rule in PTZ Channel It is the predefined rule for the PTZ channel to perform auto vehicle arming. It supports multiple detection scenes and rule settings for each scene. Steps 1. Go to Configuration → Vehicle Arming → Common Settings → Speed Dome Rule Settings 2.

  • Page 27: Platform-Controlled Vehicle Arming

    Smart Linkage PTZ Camera Steps 1. Go to Configuration → Vehicle Arming → Advanced Configuration → Blocklist & Allowlist . 2. Click Export to export license plate list template. Note If a list of license plates exists, the existing list is exported. 3.

  • Page 28: Advanced Settings

    Smart Linkage PTZ Camera The device performs a single task at one time. If it receives multiple tasks, former tasks are interrupted and the device performs the latest task. 3.2.5 Advanced Settings You can set the advanced settings according to your need to get better vehicle arming effect. Advanced Parameters Go to Configuration →...

  • Page 29: Road Traffic

    Smart Linkage PTZ Camera Uploading Picture Settings Go to Configuration → Vehicle Arming → Advanced Configuration → Picture to set the parameters of alarm pictures. Picture Quality Pictures with higher resolution and better quality have more details and larger file size. Enable OSD Overlay The device OSD is overlaid on alarm pictures.

  • Page 30: Set Detection Rule For Ptz Channel

    Smart Linkage PTZ Camera 3.3.1 Set Detection Rule for PTZ channel In Vehicle Detection, the device detects and captures the passed vehicles and the license plates. The vehicle color, type, and other information can be recognized automatically. Steps 1. Go to Configuration → Road Traffic → Detection Configuration . 2.

  • Page 31: Picture Settings

    Smart Linkage PTZ Camera Steps 1. Go to Configuration → Road Traffic → Detection Configuration . 2. Select Channel No. as Camera 02. 3. Select Vehicle Detection and enable the function. 4. Click Area Settings to set the detection rule. 5.

  • Page 32: Multi-Target-Type Detection

    Smart Linkage PTZ Camera Background The background color for the overlaid texts. Text Overlay Check the desired item to display on the picture. Display sequence is adjustable. Note • Vehicle Color, Brand, and Type are not supported in this firmware version. •...
  • Page 33 Smart Linkage PTZ Camera See Expert Mode Settings for details. 4. Click Save. What to do next Go to Picture to search and view the captured pictures. Go to Smart Display to see currently captured target pictures. Normal Mode Settings Steps 1.
  • Page 34 Smart Linkage PTZ Camera Min. Pupil Distance The min. pupil distance refers to the minimum area between two pupils, and it is basic for the device to recognize a face. 5. Set patrol schedule. 1) Click Patrol Schedule. 2) Draw time bars as desired. 3) Click a time bar and click Configuration.
  • Page 35 Smart Linkage PTZ Camera You can check desired items (Device No., Camera Info. and Capture Time) and adjust their order to display on captured pictures by The content of Device No. and Camera Info should be input on the same page. Multi-Target-Type Detection Algorithm Parameters It is used to set and optimize the parameters of the algorithm library for Multi-Target-Type Detection.

  • Page 36: Set Multi-Target-Type Detection In Panoramic Channel

    Smart Linkage PTZ Camera Enable the function, and the device automatically adjusts exposure level when human faces appear in the scene. Reference Brightness It refers to the reference brightness of a face in the face exposure mode. If a face in the actual scene is brighter than the set reference brightness, the device lower the exposure level.
  • Page 37 Smart Linkage PTZ Camera Set Shield Region The shield region allows you to set the specific region in which the set smart function rule is invalid. Steps 1. Select Shield Region. 2. Click to draw shield area. Repeat this step above to set more shield regions. 3.
  • Page 38 Smart Linkage PTZ Camera Multi-Target-Type Detection Algorithm Parameters It is used to set and optimize the parameters of the algorithm library for Multi-Target-Type Detection in the panoramic channel. Go to the Configuration → Multi-Target-Type Detection → Camera 02 → Advanced Configuration for configuration.

  • Page 39: Smart Event

    Smart Linkage PTZ Camera triggered. For example, if the face filtering time is set as 5 seconds, the camera will capture the detected face when the face keeps staying in the scene for 5 seconds. 3.5 Smart Event Note You need to enable the smart event function on VCA Resource page first to show the function configuration page.

  • Page 40: Set Line Crossing Detection

    Smart Linkage PTZ Camera 1) Click Max. Size, and drag the mouse on live image. If you want to change the size, click the button and draw again. 2) Click Min. Size, and drag the mouse on the live image. If you want to change the size, click the button and draw again.
  • Page 41 Smart Linkage PTZ Camera 4. Optional: Click Lock to lock PTZ control to prevent the interruption from other PTZ related action during configuration. Normally, the PTZ control is automatically locked when you enter the configuration interface. You can manually resume the lock when the countdown is over. 5.

  • Page 42: Set Region Entrance Detection

    Smart Linkage PTZ Camera 1) Click Max. Size, and drag the mouse on live image. If you want to change the size, click the button and draw again. 2) Click Min. Size, and drag the mouse on the live image. If you want to change the size, click the button and draw again.

  • Page 43: Set Region Exiting Detection

    Smart Linkage PTZ Camera 2) Click Min. Size, and drag the mouse on the live image. If you want to change the size, click the button and draw again. 8. Set detection parameters. Sensitivity It stands for the sensitivity of detecting an target. The higher the value is, the more easily the target is detected.
  • Page 44 Smart Linkage PTZ Camera Note PTZ control is only available for Camera 01. 6. Draw detection area. 1) Select a Region No.. Up to 4 regions can be set. 2) Click Detection Area. 3) Click on the live image to draw the boundaries of the detection area, and right click to complete drawing.

  • Page 45: Detect Audio Exception

    Smart Linkage PTZ Camera 3.5.5 Detect Audio Exception Audio exception detection function detects the abnormal sound in the surveillance scene, such as the sudden increase/decrease of the sound intensity, and some certain actions can be taken as response. Steps 1. Go to Configuration → Event → Smart Event → Audio Exception Detection . 2.
  • Page 46 Smart Linkage PTZ Camera • You can view the live image in one or two windows. Click to switch. • You can choose a live view. Click to choose a live view camera channel to display. • You can change the layout of the display page. Click and check the display content you need to add to the layout.

  • Page 47: Chapter 4 Ptz

    Smart Linkage PTZ Camera Chapter 4 PTZ PTZ is an abbreviation for pan, tilt, and zoom. It means the movement options of the camera. 4.1 PTZ Control In live view interface, you can use the PTZ control buttons to control the device panning, tilting, and zooming.
  • Page 48 Smart Linkage PTZ Camera Non-motor Vehicle Choose Non-motor Vehicle when you monitor the non-motor vehicles. Motor Vehicle Choose Motor Vehicle when you monitor the motor vehicles. Auto You are recommended to set it as Auto when the application scene of the speed dome is complicated.

  • Page 49: Set Preset

    Smart Linkage PTZ Camera 4.2 Set Preset A preset is a predefined image position. For the defined preset, you can call the preset No. to view the position. Steps 1. Click to show the setting panel, and click 2. Use the PTZ control buttons to move the lens to the desired position. 3.

  • Page 50: Set Patrol Scan

    Smart Linkage PTZ Camera Preset No. Function Preset No. Function Day mode Start frame scan Night mode Start auto scan Call pattern 1 Start tilt scan Call pattern 2 Start panorama scan Call pattern 3 Call patrol 5 Call pattern 4 Call patrol 6 One-touch patrol Call patrol 7...

  • Page 51: Set Limit

    Smart Linkage PTZ Camera Stop patroling. Delete the patrol. Set the patrol. Note You can delete all patrols in Configuration → PTZ → Clear Config . Click Clear All Patrols, and click Save. 4.4 Set Limit The device can only move within the limited range. Steps 1.

  • Page 52: Set Scheduled Tasks

    Smart Linkage PTZ Camera Steps 1. Go to Configuration → PTZ → Initial Position . 2. Move the device to the needed position by manually controlling the PTZ control buttons. 3. Click Set to save the information of initial position. Call The device moves to the set initial position.

  • Page 53: Set Privacy Mask

    Smart Linkage PTZ Camera 6. Click Save. 4.8 Set Privacy Mask Privacy mask enables you to cover certain areas on the live image to prevent certain spots in the surveillance area from being live viewed and recorded. Steps 1. Go to Configuration → PTZ → Privacy Mask . 2.

  • Page 54: Set Smart Tracking

    Smart Linkage PTZ Camera 4.9 Set Smart Tracking The function allows the device detecting and tracking the moving targets in the scene. The target stays in the center of the live image with a predefined size during the tracking process. Steps 1.

  • Page 55: Panorama Tracking

    Smart Linkage PTZ Camera 9. Click Save. 4.11 Panorama Tracking This function links panoramic channel with PTZ channel through calibration. The PTZ channel tracks moving objects in panoramic channel and automatically adjusts its PTZ positions to keep the target in the center of PTZ view for more details. 4.11.1 Adjust Scene of Panoramic Channel If the panoramic channel adopts a varifocal lens, you have to set the scene for the channel before calibrating the two channels to establish the link.

  • Page 56: Set Tracking Parameters

    Smart Linkage PTZ Camera 3) After the calibration is finished, click Stop Calibration and exit the interface. 4. Optional: If automatic calibration fails, you can use the manual calibration. 1) Select the Calibration Mode as Manual. 2) Select a calibration point in Calibration Parameter list. A numbered green cross is displayed on the panoramic image.

  • Page 57: Advanced Settings For Panorama Tracking

    Smart Linkage PTZ Camera Set auto zoom The device determines the actual zoom ratio dynamically according to the ratio control detected target size and the set Self-adaptive Ratio Coefficient. Larger Self-adaptive Ratio Coefficient means larger zoomed target during tracking 4. Set the tracking duration. - When you set the Tracking Duration as 0, the PTZ channel keeps tracking the target until it leaves the view of the panoramic channel.

  • Page 58: Set Device Position

    Smart Linkage PTZ Camera It is the face grading threshold that triggers duplicates checking. When the face grading is higher than the set value, the captured face is compared with the face pictures that in the duplicates removing library. Duplicates Removing Library Update Time Every face picture is kept in the duplicates removing library for the set update time.

  • Page 59: Gps Calibration

    Smart Linkage PTZ Camera The higher the value is, the easier the alarm will be triggered. Upload Vandal-proof Alarm The device uploads the alarm information when the alarm is triggered. Vandal-proof Alarm Voice Warning The device triggers the alarm with audible warning. 6.

  • Page 60: Verify Calibration

    Smart Linkage PTZ Camera 4.13.2 Verify Calibration Before You Start Choose verification points on the ground in the monitoring scene and measure the precise longitude and latitude of the points. Steps 1. Go to Configuration → PTZ → GPS Calibration → Calibration Verification . Note The PTZ control is automatically locked to avoid interruption during configuration.
  • Page 61 Smart Linkage PTZ Camera Steps 1. Go to Configuration → PTZ → Prioritize PTZ . 2. Set the priority signal and delayed time. Network The network signal controls the device with priority. RS-485 The RS-485 signal controls the device with priority. Delay It refers to the time interval of PTZ operation controlled by different signals.

  • Page 62: Chapter 5 Live View

    Smart Linkage PTZ Camera Chapter 5 Live View It introduces the live view parameters, function icons and transmission parameters settings. 5.1 Live View Parameters The supported functions vary depending on the model. Note For multichannel devices, select the desired channel first before live view settings. 5.1.1 Window Division You can choose a layout for live view window.

  • Page 63: Start Digital Zoom

    Smart Linkage PTZ Camera 5.1.5 Start Digital Zoom It helps to see a detailed information of any region in the image. Steps 1. Click to enable the digital zoom. 2. In live view image, drag the mouse to select the desired region. 3.

  • Page 64: Lens Initialization

    Smart Linkage PTZ Camera 5.1.9 Lens Initialization Lens initialization is used on the device equipped with motorized lens. The function can reset lens when long time zoom or focus results in blurred image. This function varies according to different models. Manual Lens Initialization Click to operate lens initialization.
  • Page 65 Smart Linkage PTZ Camera UDP is suitable for the unstable network environment that does not demand high video fluency. MULTICAST MULTICAST is suitable for the situation that there are multiple clients. You should set the multicast address for them before selection. Note For detailed information about multicast, refer to Multicast .

  • Page 66: Chapter 6 Video And Audio

    Smart Linkage PTZ Camera Chapter 6 Video and Audio This part introduces the configuration of video and audio related parameters. 6.1 Video Settings This part introduces the settings of video parameters, such as, stream type, video encoding, and resolution. Go to setting page: Configuration → Video/Audio → Video . Note For device with multiple camera channels, select a channel before other settings.

  • Page 67: Resolution

    Smart Linkage PTZ Camera 6.1.3 Resolution Select video resolution according to actual needs. Higher resolution requires higher bandwidth and storage. 6.1.4 Bitrate Type and Max. Bitrate Constant Bitrate It means that the stream is compressed and transmitted at a comparatively fixed bitrate. The compression speed is fast, but mosaic may occur on the image.
  • Page 68 Smart Linkage PTZ Camera H.264 H.264, also known as MPEG-4 Part 10, Advanced Video Coding, is a compression standard. Without compressing image quality, it increases compression ratio and reduces the size of video file than MJPEG or MPEG-4 Part 2. H.264+ H.264+ is an improved compression coding technology based on H.264.

  • Page 69: Profile

    Smart Linkage PTZ Camera 6.1.8 Profile This function means that under the same bitrate, the more complex the profile is, the higher the quality of the image is, and the requirement for network bandwidth is also higher. 6.1.9 SVC Scalable Video Coding (SVC) is the name for the Annex G extension of the H.264 or H.265 video compression standard.

  • Page 70: Set Roi

    Smart Linkage PTZ Camera 6.2.1 Set ROI ROI (Region of Interest) encoding helps to assigns more encoding resource to the region of interest, thus to increase the quality of the ROI whereas the background information is less focused. Before You Start Please check the video coding type.

  • Page 71: Set License Plate Tracking Roi

    Smart Linkage PTZ Camera Note ROI level means the image quality enhancing level. The larger the value is, the better the image quality would be. 4. Click Save. 6.2.3 Set License Plate Tracking ROI When the license plate tracking ROI function is enabled and the license plate appears in the live picture, the image of the license plate is clearer than that of the surrounding area.

  • Page 72: Audio Settings

    Smart Linkage PTZ Camera 2. Select a channel. 3. Check Enable Dual-VCA. 4. Click Save. 6.4 Audio Settings It is a function to set audio parameters such as audio encoding, environment noise filtering. Go to the audio settings page: Configuration → Video/Audio → Audio . 6.4.1 Audio Input External audio pick-up device is available for audio input, and audio encoding and input volume are configurable.

  • Page 73: Display Settings

    Smart Linkage PTZ Camera Before You Start • Make sure the audio input device (pick-up or microphone) and audio output device (speaker) connected to the device is working properly. Refer to specifications of audio input and output devices for device connection. •...
  • Page 74 Smart Linkage PTZ Camera You can limit the changing ranges of iris, shutter and gain by setting Max. Iris Limit, Min. Iris Limit, Max. Shutter Limit, Min. Shutter Limit and Limit Gain for better exposure effect. Iris Priority The value of iris needs to be adjusted manually. The shutter and gain values are adjusted automatically according to the brightness of the environment.
  • Page 75 Smart Linkage PTZ Camera Day/Night Switch Day/Night Switch function can provide color images in the day mode and black/white images in the night mode. Switch mode is configurable. The image is always in color. Night The image is always black/white Auto The camera switches between the day mode and the night mode according to the illumination automatically.
  • Page 76 Smart Linkage PTZ Camera If you focus on an object against strong backlight, the object will be too dark to be seen clearly. BLC (backlight compensation) compensates light to the object in the front to make it clear. If BLC mode is set as Custom, you can draw a red rectangle on the live view image as the BLC area.

  • Page 77: Image Parameters Switch

    Smart Linkage PTZ Camera Defog You can enable the defog function when the environment is foggy and the image is misty. It enhances the subtle details so that the image appears clearer. Increase the stability of video image by using jitter compensation technology. 6.6.2 Image Parameters Switch The device automatically switches image parameters in set time periods.

  • Page 78: Osd

    Smart Linkage PTZ Camera and PAL. In NTSC, 30 frames are transmitted each second. Each frame is made up of 525 individual scan lines. In PAL, 25 frames are transmitted each second. Each frame is made up of 625 individual scan lines.

  • Page 79: Chapter 7 Video Recording And Picture Capture

    Smart Linkage PTZ Camera Chapter 7 Video Recording and Picture Capture This part introduces the operations of capturing video clips and snapshots, playback, and downloading captured files. 7.1 Storage Settings This part introduces the configuration of several common storage paths. 7.1.1 Memory Card You can view the capacity, free space, status, type, and property of the memory card.
  • Page 80 The device detects the status of Hikvision memory card. You receive notifications when your memory card is detected abnormal. Before You Start The configuration page only appears when a Hikvision memory card is installed to the device. Steps 1. Go to Configuration → Storage → Storage Management → Memory Card Detection .

  • Page 81: Set Ftp

    Smart Linkage PTZ Camera Remaining Lifespan It shows the percentage of the remaining lifespan. The lifespan of a memory card may be influenced by factors such as its capacity and the bitrate. You need to change the memory card if the remaining lifespan is not enough. Health Status It shows the condition of your memory card.

  • Page 82: Set Nas

    Smart Linkage PTZ Camera Before You Start Get the FTP server address first. Steps 1. Go to Configuration → Network → Advanced Settings → FTP . 2. Configure FTP settings. Server Address and Port The FTP server address and corresponding port. User Name and Password The FTP user should have the permission to upload pictures.

  • Page 83: Set Cloud Storage

    Smart Linkage PTZ Camera The saving path of network disk files. Mounting Type Select file system protocol according to the operation system. Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is selected. 3. Click Test to check whether the network disk is available. 4.

  • Page 84: Record Automatically

    Smart Linkage PTZ Camera 7.2.1 Record Automatically This function can record video automatically during configured time periods. Before You Start Select Trigger Recording in event settings for each record type except Continuous. See Event and Alarm for details. Steps 1. Go to Configuration → Storage → Schedule Settings → Record Schedule . 2.

  • Page 85: Record Manually

    Smart Linkage PTZ Camera The time period you set to record before the scheduled time. Post-record The time period you set to stop recording after the scheduled time. Stream Type Select the stream type for recording. Note When you select the stream type with higher bitrate, the actual time of the pre-record and post-record may be less than the set value.

  • Page 86: Capture Configuration

    Smart Linkage PTZ Camera Note Go to Configuration → Local , click Save downloaded files to to change the saving path of downloaded video files. 7.3 Capture Configuration The device can capture the pictures manually or automatically and save them in configured saving path.

  • Page 87: View And Download Picture

    Smart Linkage PTZ Camera 7.3.3 View and Download Picture You can search, view and download the pictures stored in the local storage or network storage. Steps 1. Click Picture. 2. Select channel No. 3. Set search condition and click Search. The matched pictures showed in the file list.

  • Page 88: Chapter 8 Event And Alarm

    Smart Linkage PTZ Camera Chapter 8 Event and Alarm This part introduces the configuration of events. The device takes certain response to triggered alarm. 8.1 Basic Event 8.1.1 Set Motion Detection This function detects moving objects in the detection region and trigger linkage actions. Steps 1.
  • Page 89 Smart Linkage PTZ Camera Figure 8-1 Set Rules Stop Drawing Stop drawing one area. Clear All Clear all the areas. 4. Optional: You can set the parameters of multiple areas by repeating the above steps. Expert Mode You can configure different motion detection parameters for day and night according to the actual needs.

  • Page 90: Set Video Tampering Alarm

    Smart Linkage PTZ Camera 3. Select an Area and click Draw Area. Click and drag the mouse on the live image and then release the mouse to finish drawing one area. Figure 8-2 Set Rules Stop Drawing Finish drawing one area. Clear All Delete all the areas.

  • Page 91: Set Exception Alarm

    Smart Linkage PTZ Camera Figure 8-3 Set Video Tampering Area 6. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 7. Click Save. 8.1.3 Set Exception Alarm Exception such as network disconnection can trigger the device to take corresponding action. Steps 1.

  • Page 92: Set Alarm Input

    Smart Linkage PTZ Camera 4. Click Save. 8.1.4 Set Alarm Input Alarm signal from the external device triggers the corresponding actions of the current device. Before You Start Make sure the external alarm device is connected. See Quick Start Guide for cables connection. Steps 1.

  • Page 93: Chapter 9 Arming Schedule And Alarm Linkage

    Smart Linkage PTZ Camera Chapter 9 Arming Schedule and Alarm Linkage Arming schedule is a customized time period in which the device performs certain tasks. Alarm linkage is the response to the detected certain incident or target during the scheduled time. 9.1 Set Arming Schedule Set the valid time of the device tasks.

  • Page 94: Ftp/Nas/Memory Card Uploading

    Smart Linkage PTZ Camera Automatic Alarm Set the automatic alarm parameters, then the device triggers an alarm output automatically in the set arming schedule. Steps 1. Set automatic alarm parameters. Alarm Output No. Select the alarm output No. according to the alarm interface connected to the external alarm device.

  • Page 95: Send Email

    Smart Linkage PTZ Camera Refer to Set FTP to set the FTP server. Refer to Set NAS for NAS configuration. Refer to Set New or Unencrypted Memory Card for memory card storage configuration. 9.2.3 Send Email Check Send Email, and the device sends an email to the designated addresses with alarm information when an alarm event is detected.

  • Page 96: Notify Surveillance Center

    Smart Linkage PTZ Camera 9.2.4 Notify Surveillance Center Check Notify Surveillance Center, the alarm information is uploaded to the surveillance center when an alarm event is detected. 9.2.5 Trigger Recording Check Trigger Recording, and the device records the video about the detected alarm event. For device with more than one camera channels, you can set one or more channels to take recordings if needed.
  • Page 97 Smart Linkage PTZ Camera For audible alarm output settings, refer to Set Audible Alarm Output . Note Before using the function, go to Configuration → Video/Audio → Audio to enable built-in speaker in advance. The function is only supported by certain camera models. Set Audible Alarm Output When the device detects targets in the detection area, audible alarm can be triggered as a warning.

  • Page 98: Chapter 10 Network Settings

    Smart Linkage PTZ Camera Chapter 10 Network Settings 10.1 TCP/IP TCP/IP settings must be properly configured before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be configured simultaneously without conflicting to each other. Go to Configuration →...

  • Page 99: Multicast

    Smart Linkage PTZ Camera Input IPv6 Address, IPv6 Subnet, IPv6 Default Gateway. Consult the network administrator for required information. It stands for maximum transmission unit. It is the size of the largest protocol data unit that can be communicated in a single network layer transaction. The valid value range of MTU is 1280 to 1500.

  • Page 100: Multicast Discovery

    Smart Linkage PTZ Camera 10.1.2 Multicast Discovery Check the Enable Multicast Discovery, and then the online network camera can be automatically detected by client software via private multicast protocol in the LAN. 10.2 Port The device port can be modified when the device cannot access the network due to port conflicts. Caution Do not modify the default port parameters at will, otherwise the device may be inaccessible.

  • Page 101: Port Mapping

    Smart Linkage PTZ Camera Note • Enhanced SDK Service Port, WebSocket Port, and WebSockets Port are only supported by certain models. • For device models that support that function, go to Configuration → Network → Advanced Settings → Network Service to enable it. 10.3 Port Mapping By setting port mapping, you can access devices through the specified port.

  • Page 102: Set Port Mapping On Router

    Smart Linkage PTZ Camera What to do next Go to the router port mapping settings interface and set the port number and IP address to be the same as those on the device. For more information, refer to the router user manual. 10.3.3 Set Port Mapping on Router The following settings are for a certain router.

  • Page 103: Snmp

    Smart Linkage PTZ Camera 10.4 SNMP You can set the SNMP network management protocol to get the alarm event and exception messages in network transmission. Before You Start Before setting the SNMP, you should download the SNMP software and manage to receive the device information via SNMP port.

  • Page 104: Access To Device Via Pppoe Dial Up Connection

    Smart Linkage PTZ Camera By Browsers Enter the domain name in the browser address bar to access the device. By Client Software Add domain name to the client software. Refer to the client manual for specific adding methods. 10.6 Access to Device via PPPoE Dial Up Connection This device supports the PPPoE auto dial-up function.

  • Page 105: Set Isup

    Smart Linkage PTZ Camera 10.7 Set ISUP When the device is registered on ISUP platform (formerly called Ehome), you can visit and manage the device, transmit data, and forward alarm information over public network. Steps 1. Go to Configuration → Network → Advanced Settings → Platform Access . 2.

  • Page 106: Set Alarm Server

    Smart Linkage PTZ Camera WebSocket or WebSockets protocol should be enabled if you use Google Chrome 57 and its above version or Mozilla Firefox 52 and its above version to visit the device. Otherwise, live view, image capture, digital zoom, etc. cannot be used. If the device uses HTTP, enable WebSocket.

  • Page 107: Tcp Acceleration

    Smart Linkage PTZ Camera Note HTTP, HTTPS, and ISUP are selectable. It is recommended to use HTTPS, as it encrypts the data transmission during communication. 4. Click Test to check if the IP or host is available. 5. Click Save. 10.11 TCP Acceleration TCP acceleration is used to improve latency and reduce packet loss caused by network congestion in poor network condition, and guarantee the fluency of live view.

  • Page 108: Chapter 11 System And Security

    Smart Linkage PTZ Camera Chapter 11 System and Security It introduces system maintenance, system settings and security management, and explains how to configure relevant parameters. 11.1 View Device Information You can view device information, such as Device No., Model, Serial No. and Firmware Version. Enter Configuration →...

  • Page 109: Import And Export Configuration File

    Smart Linkage PTZ Camera 11.4 Import and Export Configuration File It helps speed up batch configuration on other devices with the same parameters. Steps 1. Export configuration file. 1) Go to Configuration → System → Maintenance → Upgrade & Maintenance . 2) Click Device Parameters and input the encryption password to export the current configuration file.

  • Page 110: View Open Source Software License

    Smart Linkage PTZ Camera Firmware Directory Locate the directory which the upgrade file belongs to. 3. Click Browse to select the upgrade file. 4. Click Upgrade. 11.8 View Open Source Software License Go to Configuration → System → System Settings → About Device , and click View Licenses. 11.9 Set Live View Connection It controls the remote live view connection amount.

  • Page 111: Set Dst

    Smart Linkage PTZ Camera 2. Select Time Zone. 3. Click NTP. 4. Set Server Address, NTP Port and Interval. Note Server Address is NTP server IP address. 5. Click Test to test server connection. 6. Click Save. 11.10.3 Set DST If the region where the device is located adopts Daylight Saving Time (DST), you can set this function.

  • Page 112: Set Ip Address Filter

    Smart Linkage PTZ Camera Digest and digest/basic are supported, which means authentication information is needed when WEB request is sent to the device. If you select digest/basic, it means the device supports digest or basic authentication. If you select digest, the device only supports digest authentication. WEB Digest Algorithm MD5, SHA256 and MD5/SHA256 encrypted algorithm in WEB authentication.

  • Page 113: Set Qos

    Smart Linkage PTZ Camera Note • Complete certificate management before selecting server certificate. Refer to Certificate Management for detailed information. • If the function is abnormal, check if the selected certificate is abnormal in Certificate Management. 5. Click Save. Create and Install Self-signed Certificate Steps 1.

  • Page 114: Set Ieee 802.1X

    Smart Linkage PTZ Camera Note QoS needs support from network device such as router and switch. Steps 1. Go to Configuration → Network → Advanced Configuration → QoS . 2. Set Video/Audio DSCP, Alarm DSCP and Management DSCP. Note Network can identify the priority of data transmission. The bigger the DSCP value is, the higher the priority is.

  • Page 115: Ssh

    Smart Linkage PTZ Camera 1. Go to Configuration → System → Maintenance → Security Audit Log . 2. Select log types, Start Time, and End Time. 3. Click Search. The log files that match the search conditions will be displayed on the Log List. 4.

  • Page 116: Certificate Management

    Smart Linkage PTZ Camera 11.11.9 Certificate Management It manages the server/client certificates and CA certificate of the device. Server Certificate/Client Certificate Note The device has default self-signed server/client certificate installed. The certificate ID is default. Create and Install Self-signed Certificate Steps 1.
  • Page 117 Smart Linkage PTZ Camera 7. Send the file to a trusted-third party for signature. 8. After receiving the certificated sent back from the third-party, install it to the device. 1) Click Import. 2) Input Certificate ID. Note The input certificate ID cannot be the same as the existed ones. 3) Click Browse to select the certificate file.

  • Page 118: User And Account

    Smart Linkage PTZ Camera Install CA Certificate Before You Start Prepare a CA certificate in advance. Steps 1. Go to Configuration → System → Security → Certificate Management . 2. Input Certificate ID. Note The input certificate ID cannot be the same as the existing ones. 3.
  • Page 119 Smart Linkage PTZ Camera Operator Operators can be assigned all permission except for operations on the administrator and creating accounts. Modify Select a user and click Modify to change the password and permission. Delete Select a user and click Delete. Note The administrator can add up to 31 user accounts.

  • Page 120: Appendix A. Device Command

    Smart Linkage PTZ Camera Appendix A. Device Command Scan the following QR code to get device common serial port commands. Note that the command list contains the commonly used serial port commands for all Hikvision network cameras.

  • Page 121: Appendix B. Device Communication Matrix

    Smart Linkage PTZ Camera Appendix B. Device Communication Matrix Scan the following QR code to get device communication matrix. Note that the matrix contains all communication ports of Hikvision network cameras.
  • Page 122 UD20021B-A...

This manual is also suitable for:

Ids-2sk8144ixs-d/j

Table of Contents