REVLON ONE STEP AIR STRAIGHT Manual page 2

OPERATING INSTRUCTIONS
This appliance is intended for household use only.
The appearance of this appliance may differ from the illustration.
Only use this appliance for its intended purpose, as described in this manual.
AIRPAUSE™ TECHNOLOGY
Airflow is activated when plates are closed, it pauses when handles are released.
CERAMIC TOURMALINE PLATES INFUSED WITH ARGAN OIL
Help increase shine and reduce damage from overstyling with even heat distribution.
OVERHEATING CUT-OFF
This appliance is equipped with a thermostat that will cycle OFF should the heat of the dryer
exceed the optimum drying level, due to partially blocked air inlet or outlet openings.
In the event that the appliance stops or releases only cool air during use, turn the appliance
OFF and allow it to cool down. Once the appliance cools, the thermostat will automatically
reset and usage may resume.
DAMP HAIR SETTINGS
Use Cool, Low, Medium or High Air to dry hair.
DRY HAIR SETTINGS
Use Hot Air & Heated Plates or Heated Plates only to style dry hair.
DO NOT use dry hair settings on wet or damp hair.
HOW TO OPERATE THE ONE-STEP™ AIR STRAIGHT
• Plug the appliance into the mains socket.
• To unlock and turn the appliance on, rotate the control dial clockwise, to the right.
• To dry, start with the Low Air (2.) setting, then adjust to Medium Air (3.) or High Air (4.),
as desired. AIRFLOW WILL NOT BEGIN UNTIL YOU ACTIVATE IT BY PRESSING THE
HANDLES TOGETHER.
• To straighten & finish the look, adjust setting to Hot Air & Heated Plates (5.) or Heated
Plates (6.) only. ONLY USE DRY HAIR SETTINGS ON DRY HAIR.
• Lock in the look by using the cold button (1.).
• To turn the appliance off, rotate the control dial counterclockwise, to the left.
STYLING TIPS
• Towel or air-dry hair until it's just damp, then run a comb through to detangle.
• Separate hair into manageable sections.
• With the air vent side on top, squeeze handles together to clamp hair and slowly
activate airflow.
• Slowly slide appliance to the ends. Repeat until hair is fully dry.
• Smooth and finish by rotating the control setting to Hot Air & Heated Plates (5.)
or Heated Plates (6.) ONLY.
• The heated plates indicator lights will glow when the plates are ready to use.
• Separate hair into manageable sections.
• Clamp hair firmly, slide the appliance to ends. Repeat until desired look is achieved.
• Allow hair to cool before combing or brushing.
CLEANING
Routine cleaning is highly recommended. Always unplug the appliance from the mains after
use and allow it to cool before cleaning. To clean, wipe the appliance with a damp cloth.
Dust and lint can be removed from the air intake openings with a small brush or vacuum
cleaner with a brush attachment. Make certain the appliance is completely dry before using.
Keep heated surfaces clean and free of dust, dirt, styling sprays and gels.
DO NOT allow moisture or additional debris to enter the unit while cleaning.
STORAGE
Always unplug when not in use.
Allow the appliance to cool before storing. Always store in a dry location. Do not pull or twist
the cord. Do not wrap the cord around the appliance, as this may cause the cord to wear
prematurely and break. Regularly check the power cord for wear and damage (particularly
where it enters the appliance and the plug).
FEATURES
A. Ceramic Tourmaline plates & teeth, infused with Argan Oil
B. Airflow vents
C. AirPause™ Technology
D. Heated plate indicator lights
E. Air inlets
F. 6 settings & control dial
G. 2.5m swivel cord
H. Glove
A
B
H
F
DAMP HAIR SETTINGS
C
6 SETTINGS
DRY HAIR SETTINGS
(1.)
(5.)
(2.)
(3.)
(6.)
(4.)
THESE SETTINGS MUST BE
USED ON DRY HAIR ONLY
D
F
E
G