Cpu Configuration - ASROCK P45R2000 User Manual

3 . 3 . 1 CPU Configuration

3 . 3 . 1 3 . 3 . 1 CPU Configuration CPU Configuration CPU Configuration
3 . 3 . 1 3 . 3 . 1 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
Overclock Mode
[Auto]
CPU Frequency (MHz) [333]
PCIE Frequency (MHz) [100]
Boot Failure Guard [Enabled]
[Auto]
Spread Spectrum
Ratio Actual Value 8
[Disabled]
Enhanced Halt State
Intel (R) Virtualization tech. [Enabled]
[Enabled]
CPU Thermal Throttling
[Disabled]
No-Excute Memory Protection
[Enabled]
Hyper Threading Technology
[Auto]
Intel (R) SpeedStep(tm) tech.
[Disabled]
Intel (R) C-STATE tech.
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual]
and [I.O.T.]. The default value is [Auto]. If you select [Manual], Untied
Overclocking function is enabled. Please refer to page 50 for the details of
Untied Overclocking Technology. If you select [I.O.T.] (Intelligent Overclocking
Technology), you are allowed to adjust the CPU frequency and PCIE frequency
in the following two items. Therefore, the system will automatically enable the
overclocking function when your CPU is heavy loaded.
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This item should always be [Auto] for better system stability.
Ratio Actual Value
This is a read-only item, which displays the ratio actual value of this
motherboard.
Enhance Halt State
All processors support the Halt State (C1). The C1 state is supported
through the native processor instructions HLT and MWAIT and requires no
hardware support from the chipset. In the C1 power state, the processor
maintains the context of the system caches.
Intel (R) Virtualization tech.
When this option is set to [Enabled], a VMM (Virtual Machine Architecture)
can utilize the additional hardware capabilities provided by Vanderpool
Technology. This option will be hidden if the installed CPU does not support
Intel (R) Virtualization Technology.
Select the over clock
mode.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
5 8 5 8 5 8
5 8 5 8