ASROCK P45R2000 User Manual page 31

Serial ATAII Connectors
(SATAII_1 (Port0):
see p.11/12, No. 20)
(SATAII_2 (Port1):
see p.11/12, No. 21)
(SATAII_3 (Port2):
see p.11/12, No. 18)
(SATAII_4 (Port3):
SATAII_1 (Port0)
see p.11/12, No. 19)
(SATAII_5 (Port4):
see p.11/12, No. 17)
SATAII_2 (Port1)
(SATAII_6 (Port5):
see p.11/12, No. 16)
SATAII_5 (Port4) and SATAII_6 (Port5) connectors can be used for
internal storage device or be connected to eSATAII connectors to
support eSATAII device. Please read "eSATAII Interface Introduction"
on page 37 for details about eSATAII and eSATAII installation
procedures.
eSATAII Connectors
(eSATAII_TOP (Port4):
see p.11/12, No. 3)
(eSATAII_BOTTOM (Port5):
see p.11/12, No. 2)
Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
These six Serial ATAII (SATAII)
connectors support SATA data
cables for internal storage
devices. The current SATAII
SATAII_6 interface allows up to 3.0 Gb/s
SATAII_5
(Port5)
(Port4)
data transfer rate.
SATAII_3 (Port2)
SATAII_4 (Port3)
These eSATAII connectors
support SATA data cables for
eSATAII_BOTTOM
external SATAII function. The
(Port5)
current eSATAII interface
allows up to 3.0 Gb/s data
eSATAII_TOP
transfer rate.
(Port4)
Either end of the SATA data cable
can be connected to the SATA /
SATAII hard disk or the SATAII
connector on this motherboard.
You can also use the SATA data
cable to connect SATAII_5 (Port4)
or SATAII_6 (Port5) connector and
eSATAII connector.
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to
power cable to the power
the power
connector of the power supply.
supply
3 1 3 1 3 1
3 1 3 1