Sharp MZ-1E01 Instruction Manual

FOREWORD
Congratulations on your purchase of the Sharp RS-232C Serial Interface
[MZ-1E01].
Be sure to read this instruction manual in order to use the interface properly.
Be sure to keep this instruction manual.
If during use there should be something that you do not understand or
something is not functioning properly, it should prove useful.
PRECAUTIONS
1) This interface is made from LSI and other precision components and
should not be used in places where there are rapid temperature fluctu-
ations, high humidity or too much dust. Also, avoid using it in direct
sunlight. The above may cause the interface to malfunction.
2) Do not hit or drop the interface.
3) When using the interface do not touch the pins of the components
or the traces on the board directly with your hands since there is the
danger of static electricity damaging the components.
4) This manual is prepared carefully; however, if there is anything unclear,
any questionable portions, or any comments, contact your local
SHARP dealers.
The contents of the system software packs and this manual may be
changed for revision without prior notice.
5) The system software (FDOS master file) of Business Computer Model-
3500 Series is all original software of SHARP Corporation, which is
copyrighted by SHARP Corporation.
Prohibited is reproduction of the system software and this manual in
whole or in part without permission from SHARP Corporation.
- 1