Smart TV HN24GE320C / HN32GE320C / FN32GE320 / FN40GE320 / FN43GE320 IMPORTANT Please read this manual carefully before installing and operating the TV. Keep this manual handy for further reference. Content Safety Information 1.1. Markings on the product 1.2. Warning 1.3.
Page 3
Settings 9. 1. Set your device name 9.2. Channels and inputs 9.2.1 Channels 9.2.2 Inputs 9.3. Display and Sound 9.3.1 Picture 9.3.2 Sound 9.3.3 Audio output 9.4. Network & Internet 9.4.1 Wi-Fi On/Off 9.4.2 Choose available Wi-Fi network 9.4.3 Other options 9.4.4 Ethernet options 9.4.5 Others...
1. Safety information In extreme weather (storms, lightning) and long inactivity periods (going on holiday) disconnect the TV set from the mains. The mains plug is used to disconnect the TV set from the mains and therefore it must remain readily operable. If the TV set is not disconnected electrically from the mains, the device will still draw power for all situations even if the TV is in standby mode or switched off.
1.2. Warning Do not ingest the battery, due to Chemical Burn Hazard. This product or the accessories supplied with the product may contain a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children.
1.6. Data protection The application providers and the providers of the services may collect and use technical data and related information, including but not limited to technical information about this device, system and application software and peripherals. They may use such information to improve products or to provide services or technologies, which do not personally identify you.
Your TV is prepared for a VESA-compliant wall mount bracket. This is not supplied with your TV. Contact your local dealer to purchase the recommended wall mount bracket. Holes and measurements for wall mount bracket installation: (mm) (mm) (mm) (mm) 24”...
3.2. Connections HDMI ANTENNA HDMI (ARC) SATELLITE 13/18 V 400 mA max VIDEO AUDIO OUT AV IN COMMON INTERFACE Digital optical 5 V max. 500 mA Note: If the model has a CI card slot on the top, a silicone plug for the CI card slot can be found in the accessory bag (for models without CI card slot, there is no such silicone plug), please insert the silicone plug into the slot when the CI card is not in use.
Remote control Power button/Standby: Quick Standby / Standby / On SOURCE Source/Input: Select the input of the TV Numeric buttons: Switch the channel in Live TV mode, enter a number or a letter in the text box on the screen TEXT Text: Open and close teletext (where available in Live TV mode) Subtitles: Turn subtitles on and off (where available)
5. TV installation Set your TV Put your TV on a firm place which can handle the weight of the TV. To avoid danger, please do not position the TV near water or heat sources (such as light, candle, heater), do not block the ventilation at the back of the TV. 10 cm 10 cm 10 cm...
6. Initial setup For the first initial setup, the on-screen setup wizard will guide you through setting up your TV. Please follow the instructions carefully to setup your TV correctly. 6.1. Pairing Bluetooth remote Press the BACK and HOME buttons simultaneously on your remote control to enter the Bluetooth pairing mode.
6.3. Region or country selection Select the country you are located in to perform the installation correctly. This is important because the availability in the Google Play store and installation procedure of many applications depends on the geographic location (Geo-location). This is why certain applications are available for one country and not for others. 6.4.
6.4.1 Set up Google TV 6.4.1.1 Set up with the Google Home app To set up with the Google Home app, it is necessary to have a mobile device (smartphone or tablet) with the Google Home app installed. To install the Google Home app, please scan the QR code on your TV or search for Google Home in the app store on your mobile device.
6.4.1.3 Sign-in with your Google account To sign in with your Google account, enter your email address and your password. 6.4.1.4 Google Terms of Services Before you continue, please take the time to read the General Terms and Conditions, the Terms of Use for Games, the Privacy Policy, and the available Google services.
Select Accept to confirm if you want your location identified on your Google Privacy Policy and agree to automatically send diagnostic information to Google to help improve your Google experience. 6.4.1.5 Confirm or reject Google services and features Carefully read through the services and functions that your TV offers. If you don’t want to activate one or more of the offered services, you can reject them by clicking No, thanks.
6.4.1.6 Choose your subscriptions In this step you can select which streaming applications you would like to install automatically. These might be applications for which you already have a subscription for, or applications suggested to you by Google. Some applications are already pre-selected. You can deselect them, which means that they won’t be automatically installed during the first set-up process.
6.4.1.7 Set up password Press the OK button to input your 4-digit password and follow the steps on the screen. First you will need to choose a new password, then you need to confirm it again. You will need this password to edit functions, like parental controls or to reset your TV to the factory settings.
6.4.2. Select TV mode During the installation set-up, you have the option to customize your viewing experience by choosing your preferred TV mode. If you choose Home mode, your TV will function as usual, providing entertainment in your home environment. Alternatively, selecting Shop mode will configure your TV to display pertinent information directly on the screen.
7. Tuner mode Select your TV reception type Tuner to install TV/Radio channels. The reception type options Terrestrial Aerial, Cable and Satellite are available. Highlight the available TV signal reception type option and press OK or click on the right directional button to continue. If you select Skip scan, you can finish the first installation process of the TV without installing the TV channels.
7.2. Cable If the Cable option is selected, the TV will search for digital cable channels. In most cable channel networks, only digital channels are available. Select Digital to continue the scan. Operator Scan: If available, the cable operators will be listed on the screen. Highlight the desired operator and press OK.
Note for the installation of satellite channels for Nokia TVs installed in Austria or Germany: Our Nokia TVs have the Load Channel List function, which can only be selected and executed during the initial installation of the TVs. This function is only available if Austria or Germany were selected as installation countries during the initial installation of the TV.
Page 22
Operator scan: Highlight the desired operator and press OK to confirm your selection. Then press the right directional button to continue with the Operator scan. You can only select one operator from the list. The TV/radio channels found are sorted according to the LCN order of the selected operator.
8. Home screen The Home screen is the centrepiece of your TV. From the Home screen, you can launch any installed Application, launch the Live TV application to watch TV broadcasts, watch a movie from various streaming applications or switch to a device connected to the HDMI port. You can also exit the operation of any application at any time and return to the Home screen by pressing the Home button on the remote control.
On the penultimate and last position in this row you will find boxes with the options Reorder and Add apps. Select these options to reorder the applications in this row or to add new application to this Favorite applications row. The operation of the live TV application and the multimedia player is explained in a separate Menu chapter.
8.3. Library Select the Library tab on the home page to play the streaming content you have already purchased or rented on your TV or mobile devices such as your mobile phone or tablet using your Google account. 8.4. Google TV search The search tools are located at the top right of the screen.
8.5. Notifications The notification button appears only when there is one or more unread notifications. To check them, please, navigate to the Settings icon, which will open the submenu. At the bottom of the submenu, you will be able to find all the latest notifications.
Settings To see the full list of available settings, navigate to the Home Screen, by pressing the Home Screen button. Click on the Settings button in the right top corner. *The above pictures are for reference only, please refer to the product for details. Note: If you click the Settings button during the operation of media streaming applications, like YouTube, Netflix, Prime Video etc., you might enter the Display and Sound menu instead.
9.2.1 Channels In this menu you can select the reception tuner installation mode according to your TV signal reception type: Analogue, Antenna, Cable or Satellite. Select the mode and press OK to proceed to the tuning. 9.2.1.1 Analogue Channel scan – Press the OK button to perform the automatic search for Analogue channels. When the scanning process is finished, press the Back button to return to the previous Menu.
• Satellite re-scan: The satellite search process will be performed again. • Satellite add: This function is useful when the General Satellite option is selected as the TV signal type. When the Preferred Satellite option is selected, DiSEqC settings will be automatically determined and channels from new satellite providers will be added from new selected satellites, depending on the selected satellite provider.
Connected input: View the listed devices connected to the Composite or HDMI connections of your TV. You can rename the connection or assign an individual device name for specific connections. Standby inputs: View a list of available HDMI inputs. Unconnected input: View the connections to which no device is connected. Consumer Electronic Control (CEC) With the CEC function of your TV, you can operate a connected device with the TV remote control.
9.3.1 Picture Here you can adjust Picture settings. 9.3.1.1 Picture mode In the initial installation of the TV, by default, the TV is set to Energy saving picture mode. Select one of the picture mode presets or you can manually adjust Picture settings to your preferences in User mode. 9.3.1.2 User Mode (Manual picture adjustments) Adjustments you can make: •...
• Color space: Defines the spectrum of colors supported by the TV, influencing the richness and accuracy of color representation on the screen. • Color tuner: Color saturation, hue and brightness can be adjusted by changing the red, green, blue, cyan, magenta, yellow and flesh tones (skin tone).
9.4. Network & Internet You can configure your TV’s network settings using the options of this menu. 9.4.1 Wi-Fi On/Off Turn the wireless LAN (WLAN) function on and off. 9.4.2 Choose available Wi-Fi network When the Wi-Fi function is turned on, available wireless networks will be listed. Highlight See all and press OK to see all networks.
9.5. Accounts and sign-in Google TV account: This option will be available if you have signed in to your Google account. You can lock your account preferences, configure your data syncing preferences, manage your payments and purchases, adjust Google Assistant settings, enable Apps-only mode, and remove the account from your TV. Add account: Add a new account by signing in to it.
• Location: Select whether Google may collect location data according to your Wi-Fi. It is important that you provide Google with your location because the installation of many applications depends on the Geo-location. Installation of certain streaming applications, especially those that stream TV broadcast channels, is only possible according to Geo-location rules.
9.8. System 9.8.1. Accessibility Turn on/off captions, adjust their language and text size and choose a caption style. Enable or disable high-contrast text. Enable or disable Google’s Text to speech function. This function will automatically voice text displayed on your screen. It is a useful function for people with eyesight problems. In this menu section you can adjust settings for Text to speech such as speech rate and default language.
9.8.4 Language Set the Menu language of your TV. 9.8.5 Keyboard Select your virtual keyboard type and manage keyboard settings. 9.8.6 Storage The total storage space status of the TV and the connected devices, if available, is displayed here. To view detailed usage information, highlight Internal storage partition or External storage connected device and press OK.
Select your preference for Chromecast availability. You have three setting options: Always - your TV will always be visible to other devices that support this feature (even if it is in standby mode and the screen is switched off). While casting - Your TV will only be visible while using the Chromecast function. Never - Your TV will not be visible to other devices.
10. MMP – Multimedia Player Playback of multimedia data from external storage devices Plug the USB storage device into one of the USB inputs on the TV to view your photos, play your music, or watch video files stored on the connected USB storage device. To begin, start the MMP application from your Home screen and select the desired media type.
Live TV settings Select the Live TV app on the Home screen and press the OK button to launch it. If you have not installed the Live TV broadcast channels in the initial installation process, but would like to do so, follow one of these steps: •...
11.1 Channels 11.1.1 Electronic Programme Guide (EPG) Experience the convenience of the Electronic Programme Guide (EPG) feature on your TV, enabling you to effortlessly browse the schedule of channels currently available in your channel list. Please note, the availability of this function depends on the programme. To access the electronic programme guide while in Live TV mode, simply select this corresponding menu option or press the EPG button on your remote control.
Easily filter events by pressing the blue button on your remote control, offering a variety of filter options to quickly locate events of your preferred type. For more information about a highlighted event, press the yellow button to display detailed information. To view events from the previous or next day, simply press the red or green buttons respectively.
Channel MOVE Rearrange the position of channels in the channel list. • Select Channel Move. • To change the channel position, select the channel that you want to MOVE (for example, channel 1). • Move it to the number where you want the channel to be moved to (for example, channel 5) •...
Page 44
11.2.1 Source Display the list of available input sources. Select the desired one and press OK to switch to that source. 11.2.2 Picture Open the picture settings. How to adjust these settings, refer to 9.3.1. 11.2.3 Screen Open the screen aspect ratio adjustments. Adjust these settings until you feel comfortable watching TV. 11.2.4 Sound Open the sound settings.
11.2.9 Settings The Settings Menu is explained in detail in Menu chapter 9 of this User Manual. 11.3. Record To be able to record your favorite shows and movies, you have to purchase the record software since it is not available by default.
Page 46
11.3.4. Schedule list You can add reminders or recording timers via the Schedule list menu. Highlight the Schedule list and press OK. Previously set timers are listed if they are available. Select Add in the dialogue window to add a timer recording. The Schedule list menu is displayed on the screen. You can specify the type of timer by setting the Schedule type option as Reminder or Recording.
12 Channel list options To open the Channel list, open Live TV and press OK. You will be able to see the channel list defined by LCN, if this option is enabled. Some options in the Channel list: You can select Channel management, Channel operation, Select Type and Add favourite by pressing the colored button on your remote control.
Page 48
12.2 Select type By pressing the yellow button, you can decide what type of media to show in Live TV. Available options are: All channels, TV, Radio, Free, Encrypted or Favourites. 12.3 Add favorite Create favorite lists and add your preferred channels to it. Note: You only have four favorite lists available. To add a favorite channel to a list, go to Select type and select Favourites.
Unplug the power cable and wait for 30 seconds, then reconnect power cable to the socket. lf Problems are unresolved the problems still exist, do not attempt to repair the TV by yourself. Kindly contact the service centre. 14. Technical specifications HN24GE320C HN32GE320C FN32GE320 FN40GE320 FN43GE320...
Need help?
Do you have a question about the HN24GE320C and is the answer not in the manual?
Questions and answers