South Bend Tools SB1111 Owner's Manual
  1. Manuals
  2. Brands
  3. South Bend Tools Manuals
  4. Saw
  5. SB1111
  6. Owner's manual

South Bend Tools SB1111 Owner's Manual

10" 3hp 220v table saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
10" 3HP 220V TABLE SAW
MODEL SB1110/SB1111
OWNER'S MANUAL
South Bend Tools
®
A Tradition of Excellence
© January, 2021 by South Bend Tools - Revised August, 2021 (JP)
For Machines Mfd. Since 08/21 (V2.08.21)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SB1111 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for South Bend Tools SB1111

Summary of Contents for South Bend Tools SB1111

  • Page 1 10" 3HP 220V TABLE SAW MODEL SB1110/SB1111 OWNER'S MANUAL South Bend Tools ® A Tradition of Excellence © January, 2021 by South Bend Tools - Revised August, 2021 (JP) For Machines Mfd. Since 08/21 (V2.08.21)
  • Page 2 We highly value customer feedback on our manuals. If you have a moment, please share your experience using this manual. What did you like about it? Is there anything you would change to make it better? Did it meet your expectations for clarity, professionalism, and ease-of-use? South Bend Tools Technical Documentation Manager P.O. Box 2027 Bellingham, WA 98227 Email: manuals@southbendtools.com...

  • Page 3: Table Of Contents

    Fence ..............94 Riving Knife ............43 SB1110 Rails ............95 Cutting a Zero Clearance Insert ....... 44 SB1111 Rails & Extension Table ...... 96 Fence Digital Readout ........45 Miter Gauge ............97 Rip Cutting ............46 Blade Guard ............98 Crosscutting ............

  • Page 4: Introduction

    I N T R O D U C T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Identification Outfeed Outfeed Miter Gauge Miter Gauge Blade Guard Blade Guard Table Table Fence Fence with Spreader with Spreader Digital Digital...

  • Page 5: Description Of Controls & Components

    I N T R O D U C T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Description of Controls Fence Digital Readout & Components Refer to Figures 1–4 and the following descriptions to become familiar with the basic controls and components used to operate this machine.
  • Page 6 I N T R O D U C T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Adjustment Controls Table Components Figure 3. Adjustment controls. Figure 3. Adjustment controls. Figure 4. Table components. Figure 4. Table components. K. Fence Lock Lever: Locks fence in place O.

  • Page 7: Product Specifications Sb1110

    I N T R O D U C T I O N For Machines Mfd. Since 1/21 Model SB1110/SB1111 Model SB1110 10" 3 HP 220V Table Saw Product Dimensions Weight................................479 lbs. Width (side-to-side) x Depth (front-to-back) x Height............... 75 x 47 x 43-1/2 in.
  • Page 8 I N T R O D U C T I O N Model SB1110/SB1111 For Machines Mfd. Since 1/21 Motors Main Horsepower............................... 3 HP Phase............................Single-Phase Amps................................13A Speed..............................3450 RPM Type......................TEFC Capacitor-Start Induction Power Transfer ............................Belt Bearings....................Sealed & Permanently Lubricated Centrifugal Switch/Contacts Type.....................
  • Page 9 I N T R O D U C T I O N For Machines Mfd. Since 1/21 Model SB1110/SB1111 Construction Table........................Precision-Ground Cast Iron Wings........................Precision-Ground Cast Iron Cabinet..........................Pre-Formed Steel Trunnions............................Cast Iron Fence Assembly......................Steel w/Aluminum Face Rails................................Steel Miter Gauge Construction..................

  • Page 10: Product Specifications Sb1111

    I N T R O D U C T I O N Model SB1110/SB1111 For Machines Mfd. Since 1/21 Model SB1111 10" 3HP 220V Table Saw With Extension Rails Product Dimensions Weight................................611 lbs. Width (side-to-side) x Depth (front-to-back) x Height............91-1/2 x 73 x 43-1/2 in.
  • Page 11 I N T R O D U C T I O N For Machines Mfd. Since 1/21 Model SB1110/SB1111 Main Specifications Main Information Table Saw Type............................ Cabinet Maximum Blade Diameter........................10 in. Arbor Size..............................5/8 in. Arbor Speed............................4000 RPM Maximum Width of Dado........................
  • Page 12 I N T R O D U C T I O N Model SB1110/SB1111 For Machines Mfd. Since 1/21 Other Related Information Number of Dust Ports............................. 1 Dust Port Size............................4 in. Other Country of Origin ............................Taiwan Warranty ................................ 2 Years Approximate Assembly &...

  • Page 13: Glossary Of Terms

    I N T R O D U C T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Glossary of Terms The following is a list of common definitions, terms and phrases used throughout this manual as they relate to this table saw and woodworking in general. Become familiar with these terms for assembling, adjusting or operating this machine.

  • Page 14: Safety

    S A F E T Y Model SB1110/SB1111 For Machines Mfd. Since 8/21 SAFETY Understanding Risks of Machinery Operating all machinery and machining equipment can be dangerous or relatively safe depending on how it is installed and maintained, and the operator's experience, common sense, risk awareness, working conditions, and use of personal protective equipment (safety glasses, respirators, etc.).
  • Page 15 S A F E T Y For Machines Mfd. Since 8/21 Model SB1110/SB1111 Entanglement: Loose clothing, gloves, neckties, Chuck Keys or Adjusting Tools: Tools used to jewelry or long hair may get caught in adjust spindles, chucks, or any moving/...

  • Page 16: Additional Table Saw Safety

    S A F E T Y Model SB1110/SB1111 For Machines Mfd. Since 8/21 Additional Table Saw Safety Serious cuts, amputation, or death can occur from contact with rotating saw blade during operation. Workpieces, broken blades, or flying particles thrown by blade can blind or strike operators or bystanders with deadly force.

  • Page 17: Preventing Kickback

    S A F E T Y For Machines Mfd. Since 8/21 Model SB1110/SB1111 Preventing Kickback Preventing Kickback • Never move the workpiece backwards or try to back it out of a cut while the blade is moving. If you cannot complete a cut for...

  • Page 18: Preparation

    P R E P A R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 PREPARATION Preparation Overview Required for Setup The purpose of the preparation section is to help The items listed below are required to you prepare your machine for operation.

  • Page 19: Power Supply Requirements

    P R E P A R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Power Supply Requirements Serious injury could occur if you connect the machine to power before completing the Availability setup process. DO NOT connect to power until instructed later in this manual.
  • Page 20 P R E P A R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Grounding Requirements Improper connection of the equipment-grounding wire can result in a risk of electric shock. The This machine must be grounded! In the event...

  • Page 21: Unpacking

    P R E P A R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Unpacking This item was carefully packaged to prevent damage during transport. If you discover any damage, please immediately call Customer Service at (360) 734-1540 for advice. You may...
  • Page 22 B. Fence Tube 75" ..........1 Front Rail 75" ..........1 D. Rear Rail 62 ⁄ " ..........1 Figure 11. SB1111 Fence rail components. Figure 11. SB1111 Fence rail components. Figure Figure 9. Extension Table. Extension Table. Figure 10. SB1110 Fence rail components.
  • Page 23 P R E P A R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 SB1111 Extension Table Assembly SB1111 Outfeed Table Assembly (Figure 12) (Figure 13) A. Lower Shelf Brackets ........2 A. Outfeed Table Front Bracket ......1 B.

  • Page 24: Hardware Recognition Chart

    P R E P A R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Hardware Recognition Chart USE THIS CHART TO MATCH UP HARDWARE DURING THE INVENTORY Wing AND ASSEMBLY PROCESS. Lock " Flat Flat Head Phillips "...

  • Page 25: Cleaning & Protecting

    P R E P A R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Cleaning & Protecting Avoid chlorine-based solvents, such as The unpainted surfaces are coated at the factory acetone or brake parts cleaner that may with a heavy-duty rust preventative that damage painted surfaces.

  • Page 26: Location

    P R E P A R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Location Weight Load Refer to the Machine Specifications for the Physical Environment weight of your machine. Make sure that the surface upon which the machine is placed will...

  • Page 27: Assembly

    SB1110 Extension Wing head cap screw, (1) 8mm lock washer, and (1) below. M8-1.25 hex nut (see Figure 16). — If you are assembling the SB1111, follow the instructions for installing the Main Table Main Table extension table on Page 27 and outfeed...
  • Page 28 P R E P A R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 While an assistant holds wing in place, — If outside end of extension wing tilts up, attach extension wing to right side of main place strip of masking tape along top edge table with (4) M8-1.25 x 25 hex bolts and (4)
  • Page 29 Figure 22. SB1110 fence tube mounted to front rail. Figure Figure 24. Front rail fastener locations. . Front rail fastener locations. SB1111 Extension Table Fasten rear rail to extension table with Install (2) extension table mounting clips (3) M8-1.25 x 25 cap screws, (6) 8mm lock...
  • Page 30 P R E P A R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Align main table and extension table with Rotate both feet until they are tight against straightedge, as shown in Figure 26, then...
  • Page 31 Figure 31. Fence tube mounted to front rail. . Fence tube mounted to front rail. thread feet into bottom of each support leg. SB1111 Outfeed Table Place outfeed table assembly upright with Turn outfeed table upside down and place on feet on floor, align slots in outfeed table level, protected surface.
  • Page 32 P R E P A R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Blade & Fence Install fence lock lever as shown in Figure 37, then place fence on rail on right Turn insert lock bolt so it is parallel to inner hand side of blade.

  • Page 33: Dust Collection

    Minimum CFM at Dust Port: • SB1110: 400 CFM • SB1111: 400 CFM Do not confuse this CFM recommendation with the rating of the dust collector. To determine the CFM at the dust port, you must consider these variables: (1) CFM rating of the dust...

  • Page 34: Test Run

    P R E P A R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Test Run Connect machine to power source. Turn power key to ON. After all preparation steps have been completed, the machine and its safety features must be Twist Emergency Stop button clockwise tested to ensure correct operation.

  • Page 35: Final Setup

    P R E P A R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Final Setup Inspections & Adjustments The remaining tasks required for assembling the saw include installing the table insert and cutting a slot for the blade, checking fence...

  • Page 36: Operation

    Regardless of the content in this section, South Bend Tools will not be held liable for Safety precautions and instructions for each type accidents caused by lack of training. of cut are located on the following pages: •...

  • Page 37: Workpiece Selection

    O P E R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Workpiece Selection Non-Through & Through Cuts Some workpieces are not safe to cut on this machine or may need to be modified before they can be safely cut.

  • Page 38: Blade Requirements

    O P E R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Blade Requirements Ripping Blade Features: • Best for cutting with the grain • 20-40 teeth The spreader/riving knife included with this • Flat-top ground tooth profile machine is 0.098"...
  • Page 39 O P E R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Dado Blades Combination Blade Features: • Designed to cut both with and across grain A dado set or dado blade is used to cut dadoes or •...

  • Page 40: Blade Installation

    O P E R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Blade Installation Slide blade over arbor with teeth facing front of saw (see Figure 51). To reduce risk of shock or accidental startup, always...

  • Page 41: Blade Guard Assembly

    O P E R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Blade Guard Assembly In order to work properly, the spreader or riving knife cannot be bent or misaligned with The term "blade guard" refers to the assembly the blade.
  • Page 42 O P E R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Turn knob clockwise to tighten. Tug blade — If the spreader/riving knife is not inside guard assembly to verify it is locked in place.
  • Page 43 O P E R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Removing Anti-Kickback Pawls To install anti-kickback pawls: DISCONNECT MACHINE FROM POWER! If you are concerned about the pawls scratching a delicate workpiece, or if you believe that they will...
  • Page 44 O P E R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 When to Use the Blade Guard To Install Blade Guard: DISCONNECT MACHINE FROM POWER! The blade guard assembly MUST always be installed on the saw for all normal through-cut...

  • Page 45: Riving Knife

    O P E R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Riving Knife How to Install the Riving Knife The riving knife is installed in the same The riving knife works in the same manner as manner as the spreader.

  • Page 46: Cutting A Zero Clearance Insert

    O P E R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Cutting a Zero Clamps Clamps Clearance Insert A zero clearance insert is provided with the table saw to reduce workpiece tear out and increase...

  • Page 47: Fence Digital Readout

    O P E R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Fence Digital Readout To use in absolute mode: Ensure fence digital readout is properly The fence digital readout has two modes of use: calibrated. See Fence Digital Readout...

  • Page 48: Rip Cutting

    O P E R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Rip Cutting Turn saw ON and allow blade to reach full speed. Rip cutting or "ripping" means cutting with the Note: Jointed edge of workpiece must slide grain of a natural wood workpiece.

  • Page 49: Crosscutting

    O P E R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Crosscutting Miter Cuts "Crosscutting" means cutting across the grain of A miter cut refers to an angled cut on the face of a natural wood workpiece, usually with a miter the workpiece, typically made at 45°...

  • Page 50: Blade Tilt/Bevel Cuts

    O P E R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Blade Tilt/Bevel Cuts This machine can accommodate dado blades up to 10" in diameter. However, you MUST install the included riving knife while using a When the blade tilt collar bolts are properly 10"...
  • Page 51 O P E R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Cutting Dadoes with a Dado To cut a dado with a dado blade: DISCONNECT MACHINE FROM POWER! Blade Adjust dado blade to desired depth of cut.
  • Page 52 O P E R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Cutting Dadoes with a Standard Reconnect saw to power source and turn saw ON. Allow blade to reach full speed, then Blade perform cutting operation.

  • Page 53: Rabbet Cutting

    O P E R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Rabbet Cutting Commonly used in furniture joinery, a rabbet Always use push sticks, featherboards, is an L-shaped groove cut in the edge of the push paddles and other safety accessories workpiece.
  • Page 54 O P E R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Cutting Rabbets with a Standard Blade A ripping blade is typically the best blade to use for cutting rabbets when using a standard blade because it removes sawdust very efficiently.

  • Page 55: Resawing

    O P E R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 Resawing Making Resaw Barrier When resawing, the resaw barrier acts in tandem with the rip fence to provide tall support for the workpiece. This reduces the probability of it binding against the blade and causing kickback.
  • Page 56 O P E R A T I O N Model SB1110/SB1111 For Machines Mfd. Since 8/21 Auxiliary Fence Thread flat head screws through auxiliary fence and into hex nuts and flat washers The auxiliary fence is necessary if you are inside fence body, then tighten securely, as resawing wood that is more than 3"...
  • Page 57 O P E R A T I O N For Machines Mfd. Since 8/21 Model SB1110/SB1111 To perform resawing operations: Reconnect saw to power source, turn it ON, and use a push stick to feed workpiece DISCONNECT MACHINE FROM POWER! through blade using a slow, steady feedrate.

  • Page 58: Shop Made Safety Accessories

    A C C E S S O R I E S Model SB1110/SB1111 For Machines Mfd. Since 8/21 Shop Made Safety Accessories Shop Made Safety To make a clamped featherboard: Cut a hardwood board approximately ⁄ " Accessories thick to size. The length and width of the board can vary according to your design.
  • Page 59 A C C E S S O R I E S For Machines Mfd. Since 8/21 Model SB1110/SB1111 Rout a ⁄ "– ⁄ " wide slot 4"–5" long in Mark a 4" line through center of countersunk workpiece and 1"–2" from short end of hole in center, then use a jig saw with a featherboard (see Figure 84).
  • Page 60 A C C E S S O R I E S Model SB1110/SB1111 For Machines Mfd. Since 8/21 Mounting Featherboards w/ Mounting Featherboard in Miter Clamps Slot Lower saw blade, then adjust fence to Lower saw blade, then adjust fence to desired width and secure it.

  • Page 61: Push Sticks

    A C C E S S O R I E S For Machines Mfd. Since 8/21 Model SB1110/SB1111 Push Sticks Supporting: A second push stick can be used to keep the workpiece firmly against the fence while cutting. When using a push stick in this manner, When used correctly, push sticks reduce the risk only apply pressure before the blade;...

  • Page 62: Push Blocks

    A C C E S S O R I E S Model SB1110/SB1111 For Machines Mfd. Since 8/21 Push Blocks The notched end of the push block is then used to push the workpiece the rest of the way through...

  • Page 63: Narrow-Rip Auxiliary Fence & Push Block

    A C C E S S O R I E S For Machines Mfd. Since 8/21 Model SB1110/SB1111 Narrow-Rip Auxiliary Note: We recommend cutting hardwood board oversize, then jointing and planing it Fence & Push Block to correct size to make sure board is square and flat.
  • Page 64 A C C E S S O R I E S Model SB1110/SB1111 For Machines Mfd. Since 8/21 Using Auxiliary Fence & Push Place workpiece 1" behind blade and evenly against table and auxiliary fence as Block illustrated in Figure 99.

  • Page 65: Outfeed & Support Tables

    A C C E S S O R I E S For Machines Mfd. Since 8/21 Model SB1110/SB1111 Outfeed & Support Crosscut Sled Tables A crosscut sled (see Figure 102) is a fantastic way to improve the safety and accuracy of crosscutting on the table saw.

  • Page 66: Accessories

    A C C E S S O R I E S Model SB1110/SB1111 For Machines Mfd. Since 8/21 Accessories Accessories T20456–DAKURA Safety Glass, Black/Clear Safety glasses can be functional as well as fashionable with EDGE™ Eyewear from This section includes the most common Wolfpeak.
  • Page 67 A C C E S S O R I E S For Machines Mfd. Since 8/21 Model SB1110/SB1111 T26699–Grizzly 10" 80T Cut-Off Blade T21879 - Zero Clearance Table Insert This general purpose blade sports an ATB grind T21878 - Zero Clearance Dado Insert...
  • Page 68 A C C E S S O R I E S Model SB1110/SB1111 For Machines Mfd. Since 8/21 T30491—Grizzly Tenoning Jig T28000—Bear Crawl Heavy Duty Mobile Base A tenoning jig is designed to work with your The Grizzly Bear Crawl Mobile Base, with a table saw to make a tenon which will be part of 1200 lb.

  • Page 69: Maintenance

    Model SB1110/SB1111 Cleaning and MAINTENANCE Maintenance Schedule Protecting Cleaning the Model SB1110/SB1111 is relatively Always disconnect easy. Vacuum excess wood chips and sawdust, machine from power before and wipe off the remaining dust with a dry cloth. performing maintenance or...

  • Page 70: Lubrication

    M A I N T E N A N C E Model SB1110/SB1111 For Machines Mfd. Since 8/21 Lubrication Worm Gear, Bevel Gear & Mounting Plate Teeth It is essential to clean components before Lubrication Type .. T26419 or NLGI#2 Equivalent lubricating them because dust and chips build up Amount .............

  • Page 71: Service

    S E R V I C E For Machines Mfd. Since 8/21 Model SB1110/SB1111 Service Service Blade Tilt Stops — If blade is 90° to table, then adjustments do not need to be made. Make sure tilt indicator shown in Figure 118 points The table saw features stop bolts that stop to 0°...

  • Page 72: Tilt Handwheel Backlash

    S E R V I C E Model SB1110/SB1111 For Machines Mfd. Since 8/21 Setting 45° Stop Bolt Continue adjusting stop bolt until it contacts the cabinet when blade is at 45°, then DISCONNECT MACHINE FROM POWER! tighten jam nut.

  • Page 73: Miter Slot To Blade Parallelism

    S E R V I C E For Machines Mfd. Since 8/21 Model SB1110/SB1111 Miter Slot to Blade With end of adjustable square just touching tip, lock square in place. Mark blade Parallelism tooth with a marker where you made this measurement.
  • Page 74 S E R V I C E Model SB1110/SB1111 For Machines Mfd. Since 8/21 10. Refer to Figures 126–127 for shim Loosen (3) table mounting bolts securing table top to base (see Figure 125), and placement. If distance A is shorter than B,...

  • Page 75: Spreader/Riving Knife Alignment

    S E R V I C E For Machines Mfd. Since 8/21 Model SB1110/SB1111 Place straightedge against side of blade and 11. Tighten one table mounting bolt a small amount and then repeat with others, spreader/riving knife at top and bottom, as shown in Figure 128.
  • Page 76 S E R V I C E Model SB1110/SB1111 For Machines Mfd. Since 8/21 Adjusting Alignment Top and Bottom Control: To move the top of the spreader/riving knife right or left (and The spreader/riving knife mounting position the bottom of the spreader/riving knife in...

  • Page 77: Fence Adjustments

    S E R V I C E For Machines Mfd. Since 8/21 Model SB1110/SB1111 Fence Adjustments Adjust top set screws (Figure 132) on fence bracket to ensure fence face is 90° to table. There are four main adjustments for the fence: squareness, height, parallelism, and clamping pressure.
  • Page 78 S E R V I C E Model SB1110/SB1111 For Machines Mfd. Since 8/21 Clamping Pressure & Parallelism Rear Set Screws The fence clamping mechanism adjusts the Fence Bracket clamping pressure to hold the fence securely and to position the fence parallel with the blade.

  • Page 79: Fence Scale Calibration

    S E R V I C E For Machines Mfd. Since 8/21 Model SB1110/SB1111 Fence Scale Fence Digital Readout Calibration Calibration The fence scale indicator window, shown The fence digital readout may need to be in Figure 137, can be calibrated with the...

  • Page 80: Miter Gauge Adjustments

    S E R V I C E Model SB1110/SB1111 For Machines Mfd. Since 8/21 Miter Gauge Place 90° square evenly against face of miter gauge and blade, as shown in Figure 140. Adjustments — If the square touches the miter body...

  • Page 81: Blade Tilt Digital Readout Calibration

    S E R V I C E For Machines Mfd. Since 8/21 Model SB1110/SB1111 Blade Tilt Digital Table/Dado Insert Readout Calibration Adjustment The blade tilt digital readout displays the The table/dado insert must sit perfectly flush current blade height and tilt. Only calibrate the with the table to provide a smooth, continuous readout after verifying that the 90°...

  • Page 82: Belt Tension & Replacement

    S E R V I C E Model SB1110/SB1111 For Machines Mfd. Since 8/21 Belt Tension & Replacement Wood Wood The drive belt stretches slightly as the saw is Block Block used. Most of the belt stretching will happen during the first 16 hours of use, but it may stretch through continued use.
  • Page 83 S E R V I C E For Machines Mfd. Since 8/21 Model SB1110/SB1111 Replacing Belt Belt Belt DISCONNECT MACHINE FROM POWER! Use handwheels to raise motor all the way up, set blade tilt to 0, then open motor cover.

  • Page 84: Troubleshooting

    TROU B LESHOOTI NG Model SB1110/SB1111 For Machines Mfd. Since 8/21 TROUBLESHOOTING If you need replacement parts, or if you are unsure how to do any of the solutions given here, feel free to call us at (360) 734-1540. Symptom...
  • Page 85 TROU B LESHOOTI NG For Machines Mfd. Since 8/21 Model SB1110/SB1111 Symptom Possible Cause Possible Solution 1. Motor or component loose. 1. Replace damaged or missing bolts/nuts or tighten if Machine has vibration or noisy loose. operation. 2. Mobile base lock knobs loose or 2.
  • Page 86 TROU B LESHOOTI NG Model SB1110/SB1111 For Machines Mfd. Since 8/21 1. Fence not mounted/adjusted 1. Remount fence and adjust correctly (Page 75). Fence does not move smoothly. correctly. 2. Rails dirty or sticky. 2. Clean and lubricate/wax rails. 1. Improper feeding technique.
  • Page 87 TROU B LESHOOTI NG For Machines Mfd. Since 8/21 Model SB1110/SB1111 1. Fence scale pointer not adjusted 1. Adjust fence scale pointer (Page 77) or re-apply Finished board is narrower than correctly or fence scale misapplied. fence scale label in correct position.

  • Page 88: Electrical

    E L E C T R I C A L Model SB1110/SB1111 For Machines Mfd. Since 8/21 ELECTRICAL Electrical Safety Instructions These pages are accurate at the time of printing. In the constant effort to improve, however, we may make changes to the electrical systems of future machines. Study this section carefully. If you see differences between your machine and what is shown in this section, call Technical Support at (360) 734-1540 for assistance BEFORE making any changes to the wiring on your machine.

  • Page 89: Wiring Diagram

    E L E C T R I C A L For Machines Mfd. Since 8/21 Model SB1110/SB1111 Wiring Diagram WARNING! Back of Control Panel SHOCK HAZARD! Disconnect power Display Circuit Board before working on wiring. Blade Tilt Sensor Blade Height...

  • Page 90: Electrical Component Photos

    E L E C T R I C A L Model SB1110/SB1111 For Machines Mfd. Since 8/21 Electrical Component Photos Display Display Circuit Board Circuit Board Figure Figure 151. Motor junction box. Power Power Switch Switch Start Start Button Button...
  • Page 91 E L E C T R I C A L For Machines Mfd. Since 8/21 Model SB1110/SB1111 Figure Figure 155. Blade height sensor. Figure Figure 156. Blade tilt sensor. -89- South Bend Tools...

  • Page 92: Parts

    P A R T S Model SB1110/SB1111 For Machines Mfd. Since 8/21 Body PARTS 131-4 131-7 131-1 131-2 131-3 131-4 131-5 128-8 128-7 128-4 128-6 128-1 128-2 128-5 128-3 128-11 128-9 84 110 128-10 -90- South Bend Tools...
  • Page 93 P A R T S For Machines Mfd. Since 8/21 Model SB1110/SB1111 Body Parts List REF PART # DESCRIPTION PART # DESCRIPTION PSB1110005 EXTENSION TABLE PSB1110114 BLADE TILT SHAFT PSB1110006 HEX BOLT M8-1.25 X 25 PSB1110115 LOCK COLLAR PSB1110007 LOCK WASHER 8MM...

  • Page 94: Trunnion

    P A R T S Model SB1110/SB1111 For Machines Mfd. Since 8/21 Trunnion 221-1 221-2 221-4 221-3 221-5 221-6 221-7 221-8 221-9 221-10 221-11 262 206 -92- South Bend Tools...
  • Page 95 P A R T S For Machines Mfd. Since 8/21 Model SB1110/SB1111 Trunnion Parts List PART # DESCRIPTION PART # DESCRIPTION PSB1110206 HEX BOLT M8-1.25 X 25 PSB1110247 PHLP HD SCR M5-.8 X 20 PSB1110207 LOCK WASHER 8MM PSB1110248 MOTOR PULLEY...

  • Page 96: Fence

    P A R T S Model SB1110/SB1111 For Machines Mfd. Since 8/21 Fence 427-1 427-2 PART # DESCRIPTION PART # DESCRIPTION PSB1110400 FENCE ASSEMBLY PSB1110415 PLASTIC PAD PSB1110401 PHLP HD SCR M6-1 X 12 PSB1110416 RAIL CLAMPING BRACKET PSB1110402 FLAT WASHER 6MM PSB1110417 SET SCREW M8-1.25 X 8...

  • Page 97: Sb1110 Rails

    P A R T S For Machines Mfd. Since 8/21 Model SB1110/SB1111 SB1110 Rails PART # DESCRIPTION PART # DESCRIPTION PSB1110500 RAIL ASSEMBLY PSB1110509 FLAT WASHER 8MM PSB1110501 RAIL (REAR) PSB1110510 LOCK WASHER 8MM PSB1110502 END CAP PSB1110511 CAP SCREW M8-1.25 X 25...

  • Page 98: Sb1111 Rails & Extension Table

    P A R T S Model SB1110/SB1111 For Machines Mfd. Since 8/21 SB1111 Rails & Extension Table PART # DESCRIPTION PART # DESCRIPTION PSB1111501 END CAP PSB1111519 RAIL (FRONT) PSB1111502 FENCE TUBE PSB1111520 HEX NUT M6-1 PSB1111503 EXTENSION TABLE PLATE...

  • Page 99: Miter Gauge

    P A R T S For Machines Mfd. Since 8/21 Model SB1110/SB1111 Miter Gauge 601-1 601-2 PART # DESCRIPTION REF PART # DESCRIPTION PSB1110600 MITER GAUGE ASSEMBLY PSB1110611 FLAT HD SCR M6-1 X 8 PSB1110601 MITER GAUGE HANDLE PSB1110612 PHLP HD SCR M5-.8 X 8...

  • Page 100: Blade Guard

    P A R T S Model SB1110/SB1111 For Machines Mfd. Since 8/21 Blade Guard 715V2 700V2 PART # DESCRIPTION PART # DESCRIPTION 700V2 PSB1110700V2 BLADE GUARD ASSEMBLY V2.08.21 PSB1110717 MOUNTING BLOCK (RIGHT) PSB1110701 FLAT HD SCR M4-.7 X 8 PSB1110718...

  • Page 101: Sb1111 Outfeed Table

    P A R T S For Machines Mfd. Since 8/21 Model SB1110/SB1111 SB1111 Outfeed Table PART # DESCRIPTION PART # DESCRIPTION PSB1111801 OUTFEED TABLE PLATE PSB1111810 OUTFEED TABLE BRACKET (FRONT) PSB1111802 PHLP HD SCR M6-1 X 12 PSB1111811 SHELF END PLATE...

  • Page 102: Machine Labels

    Never reach around or over saw blade. PART # DESCRIPTION PART # DESCRIPTION PSB1110901 BLADE GUARD LABEL PSB1111907 MODEL NUMBER LABEL (SB1111) PSB1110902 RIP FENCE LABEL PSB1110908 BLADE REQUIREMENTS LABEL (SB1110) PSB1110903 MACHINE WARNINGS LABEL PSB1111908 BLADE REQUIREMENTS LABEL (SB1111)

  • Page 103: Warranty

    WARRANTY Warranty This quality product is warranted by South Bend Tools to the original buyer for 2 years from the date of purchase. This warranty does not apply to consumable parts, or defects due to any kind of misuse, abuse, negligence, accidents, repairs, alterations or lack of maintenance. We do not reimburse for third party repairs.
  • Page 104 southbendtools.com Printed In Taiwan #JPCS21227...

This manual is also suitable for:

Sb1110

Table of Contents