iTrainer 023 User Manual

User manual - Electronic fence iTrainer 023
Tip: Visit our YouTube channel, where you will find specific tips for installing an electronic
fence and for training your dog - www.Youtube.com/ElektroObojky.
Package contents
1x Transmitter (base)
•
• 1x Power adapter
• 1x Electronic collar (receiver)
1x 6V battery (4LR44)
•
• 1x 300m of wire
• 2x spare metal contacts
• 20x training flags
• 1x test diode
• 2x screws
• 1x user manual
Basic properties
• Warning signal – the warning signal sounds before the impulse is activated to alert the dog
• Selectable pulse bandwidth – it is possible to set the pulse bandwidth
• Sound and visual indicators of damage – sound and light are triggered
signaling
• Any number of collars – you can use as many collars as you have animals. The number of collars does not matter
limited.
• Extendable up to a wire length of 600 meters
NOTICE
Take a moment to read the user manual
best results:
• The electronic collar is designed for use on dogs
• A dead battery may cause a weaker pulse strength. DO NOT USE with low battery!
Let the dog get used to the collar before you start training. The dog should not have the collar and impulses connected.
•
• Never adjust the settings while the dog is collared.
• Every time you adjust the settings, go through the ENTIRE plot with the receiver!
• The collar should only be used under your supervision.
Avoid contact of the collar with
•
• Read all instructions carefully.
IMPORTANT
It is necessary to realize that every dog has its own unique temperament. There is no way to predict how a dog
will react to this product. To ensure your dog's safety, use a long leash during initial training to
before you start installing
children!
in case of cable damage
the fence. Follow these basic guidelines for