iTrainer TP-16 Manual

WARNING
Take a moment to read the user manual before you start installing the fence. Follow these basic guidelines
for best results:
• The electronic collar is designed for use on dogs.
• A low battery may cause a weaker pulse force. DO NOT use with low battery!
• Let the dog get used to the collar before you start training. The dog should not connect the collar
and impulses.
• Never adjust the setting while the dog is collared.
• Walk the ENTIRE plot with the receiver every time you adjust the setting!
• The collar should only be used under your supervision.
• Avoid contact of the collar with children!
• Read all instructions carefully.
IMPORTANT
It is necessary to remember that every dog has its own unique temperament. There is no way to predict how
a dog will react to this product. To ensure your dog's safety, use a long leash during initial training to
keep the situation under control. It should be noted that an aggressive animal may attack the owner when
prompted. If your dog behaves aggressively, or has ever shown aggressive behavior in the past, you
should consult a cynologist about the use of the device.
Components - contents of the package
- Transmitter (base)
- Short electrodes
- Receiver
- Auxiliary flags - 25
Other items you may need
- More wire and flags
- Meter
- Small screwdriver
- Drill
- Spade or pickaxe
-
Pliers
Key definitions
Transmitter The control center of the system that transmits the radio system into the stretched wire.
Receiver
Detects a radio signal from the wire that triggers an alert or pulse as needed.
Charging the receiver
Charges the batteries inside the receiver.
iTrainer TP-16 manual
- The wire
- Mounting screws and anchors
- Test light
- USB charging cable
- Charger
- Scissors
- Lighter
- PVC pipe or water hose
- Circular saw with masonry blade
- Non-metallic collar and leash
- Wire stripping pliers