Download Print this page

PIMAX Crystal Quick Manual

Hide thumbs Also See for Crystal:

Download this manual

Crysta

Quick Guide

Connect to PC

bX Switch to PCVR mode and power onX

9X Connect the power adapter to the USB-HUBX

4X Connect the two USB plugs to the USB-HUB, then the DP cable into

your PCX

6X Connect the USB-HUB to your PC using the USB cable included with

the hubX

'X Connect the DP cable to your headset.

Need help?

Do you have a question about the Crystal and is the answer not in the manual?

Page 1 Connect to PC bX Switch to PCVR mode and power onX 9X Connect the power adapter to the USB-HUBX 4X Connect the two USB plugs to the USB-HUB, then the DP cable into your PCX 6X Connect the USB-HUB to your PC using the USB cable included with the hubX 'X Connect the DP cable to your headset.
Page 2 Battery Installation/Replace ent How to hot-swap the battery ™¨ Hot-swap the battery only when the device is in low-power mode¨ Battery Installation ¡¨ Press the power button to turn off the screen and wait for the blue Hold the buttons on both sides of the battery, and then push the battery light at the battery compartment, located at the back of the headset, to upwards into the battery holder.
Page 3 PC / AIO mode Lenses Removal To switch between 'PC' mode and 'AIO' mode (Standalone), locate the toggle switch and adjust it accordingly.. Loosen the screw that secures the lens in place. Pinch the edge of the lens holder and gently rotate the lens to release it from the holder.
Page 4 Lenses Installati n Pimax Client S ftware For guidance on how to pair your Crystal with your computer, follow the instructions within the software. Install the lenses on the lens holder for the left and right eye respectively, then gently press the edges to secure it.