Philips 65PFL6601/F7 Service Manual

65” lcd tv chassis pl16.29

Hide thumbs Also See for 65PFL6601/F7:

Quick start manual (2 pages)

Table Of Contents

Table of Contents

Quick Links

Download this manual

Service Manual

65PFL6601/F7

65PFL6621/F7

65PFL6601/F7 A PHILIPS

This service manual contains information of different types of models.

Make sure to refer to the section describing your model.

downloaded or stored in any storage medium, in any form or for any purpose without the express prior written

consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto

is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content

herein without the obligation to notify any person or organization of such changes.

with the

without the express written consent of Funai. All other trademarks used herein remain the exclusive property of

their respective owners. Nothing contained in this manual should be construed as granting, by implication or

otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any

other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights

to the fullest extent of the law.

PHILIPS

(Serial No.: DS1)

PHILIPS

(Serial No.: DS1, DS2)

(Serial No.: DS2)

design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way

chassis PL16.29

Contents

65" LCD TV

161111

Table of Contents

Need help?

Do you have a question about the 65PFL6601/F7 and is the answer not in the manual?

Questions and answers

Summary of Contents for Philips 65PFL6601/F7

Page 1 (Serial No.: DS1) 65PFL6621/F7 PHILIPS (Serial No.: DS1, DS2) 65PFL6601/F7 A PHILIPS (Serial No.: DS2) This service manual contains information of different types of models. Make sure to refer to the section describing your model. © 2016 Funai Electric Co., Ltd.
Page 2 IMPORTANT SAFETY NOTICE Proper service and repair is important to the safe, reliable operation of all P&F Equipment. The service procedures recommended by P&F and described in this service manual are effective methods of performing service operations. Some of these service special tools should be used when and as recommended.
Page 3: Table Of Contents
Cabinet Disassembly Instructions ............4-1 Electrical Adjustment Instructions [65PFL6601/F7, 65PFL6601/F7 A] ....... . 5-1 [65PFL6621/F7] .
Page 4: Specifications
SPECIFICATIONS < TUNER / NTSC > Description Condition Unit Nominal Limit 1. AFT Pull-In Range ±2.3 ±2.1 TV.ch.4 dBV 2. Synchronizing Sens. CA.ch.31 dBV CA.ch.87 dBV < TUNER / ATSC > Description Condition Unit Nominal Limit 1. Received Freq. Range (-28dBm) ±100 ch.4 -76/0...
Page 5: Important Safety Precautions
IMPORTANT SAFETY PRECAUTIONS Prior to shipment from the factory, our products are strictly inspected for recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.
Page 6 3. Design Alteration Warning - Do not alter or add 7. Product Safety Notice - Some electrical and to the mechanical or electrical design of this TV mechanical parts have special safety-related receiver. Design alterations and additions, characteristics which are often not evident from including, but not limited to circuit modifications visual inspection, nor can the protection they give and the addition of items such as auxiliary audio...
Page 7 Precautions during Servicing A. Parts identified by the # symbol are critical for safety. Replace only with part number specified. B. In addition to safety, other parts and assemblies are specified for conformance with regulations applying to spurious radiation. These must also be replaced only with specified replacements.
Page 8 Safety Check after Servicing Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and wires have been returned to original positions. Afterwards, perform the following tests and confirm the specified values in order to verify compliance with safety standards. 1.
Page 9: Standard Notes For Servicing
STANDARD NOTES FOR SERVICING Circuit Board Indications How to Remove / Install Flat Pack-IC 1. The output pin of the 3 pin Regulator ICs is 1. Removal indicated as shown. With Hot-Air Flat Pack-IC Desoldering Machine: 1. Prepare the hot-air flat pack-IC desoldering Top View Bottom View machine, then apply hot air to the Flat Pack-IC...
Page 10 3. The flat pack-IC on the CBA is affixed with glue, so With Soldering Iron: be careful not to break or damage the foil of each 1. Using desoldering braid, remove the solder from pin or the solder lands under the IC when all pins of the flat pack-IC.
Page 11 With Iron Wire: 2. Installation 1. Using desoldering braid, remove the solder from 1. Using desoldering braid, remove the solder from all pins of the flat pack-IC. When you use solder the foil of each pin of the flat pack-IC on the CBA flux which is applied to all pins of the flat pack-IC, so you can install a replacement flat pack-IC more you can remove it easily.
Page 12 Instructions for Handling Semi- conductors Electrostatic breakdown of the semi-conductors may occur due to a potential difference caused by electrostatic charge during unpacking or repair work. 1. Ground for Human Body Be sure to wear a grounding band (1 M) that is properly grounded to remove any static electricity that may be charged on the body.
Page 13: Cabinet Disassembly Instructions
CABINET DISASSEMBLY INSTRUCTIONS Screw Torque Specification 2. Disassembly Method Step/ Ref. Part Tightening Fig. Part Name Loc. Part Removal Note Number Torque SCREW BIND BLACK_NI L22 GBHS3040 +S-TITE M3X4.0 Stand SCREW BIND 3CHROM Assembly D1 4(S-1) L23 GBJS3060 +S-TITE M3X6.0 L, R SCREW F-PAN BLACK_NI L25 GCHS3060...
Page 14 Note: (1) Order of steps in procedure. When reassembling, follow the steps in reverse order. These numbers are also used as the Identification (location) No. of parts in figures. (2) Parts to be removed or installed. (3) Fig. No. showing procedure of part location (4) Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
Page 15 [2] Rear Cabinet (S-2) (S-2) (S-2) (S-5) (S-2) (S-2) (S-3) (S-5) (S-4) (S-3) (S-6) (S-2) (S-3) (S-3) (S-3) (S-3) (S-4) (S-1) (S-3) (S-2) AC Cord Cover [1] Stand Assembly L (S-1) [1] Stand Assembly R Fig. D1 PL16.29-A_DC...
Page 16 CON3 [65PFL6621/F7] Jack Holder S [4] Digital Main CBA Unit (S-8) (S-9) (S-8) Separation Sheet Jack Holder B [3] Power Supply CBA Unit (S-7) Fig. D2 PL16.29-A_DC...
Page 17 [11] LCD Panel Assembly * [8] IR Sensor CBA Unit [5] Wall Mount Bracket L, R Hook Speaker Rubber (H-1) Speaker Rubber Decoration Plate [10] Leading Edge Front (H-1) Speaker Rubber (S-12) Hook Light Guide Panel (S-10) [9] LED CBA Unit Leading Edge Cover Function Knob* (S-10)
Page 18 TV Cable Wiring Diagram [65PFL6621/F7] To LCD Panel Assembly Digital Main CBA Unit Power Supply CBA Unit CON3 CN3602 CN201 CN3901 CN3801 CN101 CN3103 CN301 To AC Cord Function To Speaker CBA Unit To LCD Panel Assembly IR Sensor LED CBA Unit CBA Unit CN4021 CN4052...
Page 19: Electrical Adjustment Instructions [65Pfl6601/F7, 65Pfl6601/F7 A]
ELECTRICAL ADJUSTMENT INSTRUCTIONS [65PFL6601/F7, 65PFL6601/F7 A] General Note: “CBA” is abbreviation for 1. Purity Check Mode “Circuit Board Assembly.” This mode cycles through full-screen displays of red, Note: Electrical adjustments are required after green, blue, and white to check for non-active pixels.
Page 20 6. Press [MENU] button. The internal Raster signal The White Balance Adjustment should be appears in the screen. (“Internal (Single)” appears performed when replacing the LCD Panel in the upper right of the screen as shown below.) or Digital Main CBA. 2.
Page 21 14. Press [7] button to select the “LDR” for Low Drive Red adjustment (“LDR” appears in the screen.) and press [CHANNEL UP/DOWN] buttons to adjust the color temperature. 15. If necessary, adjust the “LDB” or “LDR” again. 16. Press [VOLUME DOWN] button to shift to the “Debugging Message”...
Page 22: [65Pfl6621/F7]
[65PFL6621/F7] General Note: “CBA” is abbreviation for 1. Purity Check Mode “Circuit Board Assembly.” This mode cycles through full-screen displays of red, Note: Electrical adjustments are required after green, blue, and white to check for non-active pixels. replacing circuit components and certain 1.
Page 23 The VCOM Adjustment should be [65PFL6621/F7 (Serial No.:DS2)] performed when replacing the Digital Test Point Adj. Point Main CBA. [CHANNEL UP/DOWN] Screen buttons 2. VCOM Adjustment M. EQ. Spec. [65PFL6621/F7 (Serial No.:DS1)] Color analyzer See below Figure Test Point Adj. Point [CHANNEL UP/DOWN] Screen To avoid interference from ambient...
Page 24 6. Press [MENU] button. The internal Raster signal The White Balance Adjustment should be appears in the screen. (“Internal (Single)” appears performed when replacing the LCD Panel in the upper right of the screen as shown below.) or Digital Main CBA. 3.
Page 25 14. Press [7] button to select the “LDR” for Low Drive Red adjustment (“LDR” appears in the screen.) and press [CHANNEL UP/DOWN] buttons to adjust the color temperature. 15. If necessary, adjust the “LDB” or “LDR” again. 16. Press [VOLUME DOWN] button to shift to the “Debugging Message”...
Page 26: How To Initialize The Lcd Tv
HOW TO INITIALIZE THE LCD TV The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to select a language and program channels after the set has been initialized. To put the program back at the factory-default, initialize the LCD TV using the following procedure.
Page 27: Firmware Renewal Mode [65Pfl6601/F7, 65Pfl6601/F7 A]
FIRMWARE RENEWAL MODE [65PFL6601/F7, 65PFL6601/F7 A] Equipment Required 8. Select the file and press [OK] button. 9. The update will start and the following will appear a. USB storage device in the screen. b. Remote Control Unit " * " differs depending on the models.
Page 28: [65Pfl6621/F7]
[65PFL6621/F7] Equipment Required 8. The update will start and the following will appear in the screen. a. USB storage device " * " differs depending on the models. b. Remote Control Unit Software update Firmware Update Procedure Current Version ***-*****_***_* 1.
Page 29 11. Updating software is started, the following will appear in the screen. Cast TV 100% Please do NOT unplug your TV during this process. Doing so may corrupt the system making your TV inoperable. The update will take about 10 minutes. 12.
Page 30: Troubleshooting
TROUBLESHOOTING [Power Supply Section] FLOW CHART NO.1 The power cannot be turned on. Replace the Power Supply CBA Unit. FLOW CHART NO.2 When the output voltage fluctuates. Replace the Power Supply CBA Unit. FLOW CHART NO.3 When buzz sound can be heard in the periphery of power circuit. Replace the Power Supply CBA Unit.
Page 31 [Video Signal Section] FLOW CHART NO.1 The key operation is not functioning. Replace the Function CBA Unit. Replace the Digital Main CBA Unit. FLOW CHART NO.2 No operation is possible from the remote control unit. (Operation is possible from the unit.) Check AL+3.3V line and repair it if defective.
Page 32 [Audio Signal Section] FLOW CHART NO.1 Audio is not output normally. Replace the Power Supply CBA Unit or the Digital Main CBA Unit. PL16.29TR...
Page 33: Block Diagrams
BLOCK DIAGRAMS 1. System Control / Power Supply Block Diagram PL16.29BLS...
Page 34 2. Video/Audio Block Diagram PL16.29BLVA...
Page 35 3. Digital Signal Process Block Diagram PL16.29BLD...
Page 36: Schematic Diagrams / Cba And Test Points
SCHEMATIC DIAGRAMS / CBA AND TEST POINTS Standard Notes WARNING Many electrical and mechanical parts in this chassis have special characteristics. These characteristics often pass unnoticed and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
Page 37 LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON THE FOLLOWING PAGES: 1. CAUTION: CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE_A,_V FUSE. ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE DE_A,_V. 2.
Page 38 Digital Main 1 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into nine and shown as IC3001 (1/9) ~ IC3001 (9/9) in this Digital Main Schematic Diagram Section. CONTINUE DIGITAL 9 SOC+1.5V...
Page 39 Digital Main 2 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into nine and shown as IC3001 (1/9) ~ IC3001 (9/9) in this Digital Main Schematic Diagram Section. CONTINUE DIGITAL 9 SOC+1.5V...
Page 40 Digital Main 3 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into nine and shown as IC3001 (1/9) ~ IC3001 (9/9) in this Digital Main Schematic Diagram Section. DIGITAL MAIN CBA UNIT C9011 C9012...
Page 41 Digital Main 4 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into nine and shown as IC3001 (1/9) ~ IC3001 (9/9) in this Digital Main Schematic Diagram Section. IC3001(4/9) MSD95M0D-3-004E DIGITAL SIGNAL PROCESS...
Page 42 Digital Main 5 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into nine and shown as IC3001 (1/9) ~ IC3001 (9/9) in this Digital Main Schematic Diagram Section. DIGITAL MAIN CBA UNIT CONTINUE DIGITAL 9...
Page 43 Digital Main 6 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into nine and shown as IC3001 (1/9) ~ IC3001 (9/9) in this Digital Main Schematic Diagram Section. DIGITAL MAIN CBA UNIT IC3001(6/9) MSD95M0D-3-004E...
Page 44 Digital Main 7 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into nine and shown as IC3001 (1/9) ~ IC3001 (9/9) in this Digital Main Schematic Diagram Section. DIGITAL MAIN CBA UNIT CONTINUE DIGITAL 8...
Page 45 Digital Main 8 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into nine and shown as IC3001 (1/9) ~ IC3001 (9/9) in this Digital Main Schematic Diagram Section. DIGITAL MAIN CBA UNIT IC3001(8/9) MSD95M0D-3-004E...
Page 46 Digital Main 9 Schematic Diagram CONTINUE DIGITAL 4 P-ON+3.3V AL+3.3V R3605 R3606 240K R3603 R3604 CONTINUE DIGITAL 8 R3615 IC3601 P-ON+3.3V Q3601 Q3602 MP2315GJ-Z 2SK3018 2SK3018 (+1.05V REG.) AL+3.3V R3607 R3614 (SWITCHING) (SWITCHING) OPEN P-ON+20V C3601 R3601 R3602 AL+5V OPEN OPEN R3609 C3612...
Page 47 Digital Main 10 Schematic Diagram 1 NOTE: The order of pins shown in this diagram is different from that of actual IC3001. IC3001 is divided into nine and shown as IC3001 (1/9) ~ IC3001 (9/9) in this Digital Main Schematic Diagram Section. DIGITAL MAIN CBA UNIT CONTINUE DIGITAL 9...
Page 48 Function Schematic Diagram FUNCTION CBA UNIT TO DIGITAL MAIN CBA UNIT CN3103 CN4001 KEY-IN1 C4002 D4001 MM5Z5V6B D4002 OPEN R4006 R4005 R4004 R4003 R4002 R4001 2.2K 2.2K 2.7K 4.7K 8.2K SW4007 SW4006 SW4005 SW4004 SW4003 SW4002 SW4001 POWER SOURCE MENU CH UP DOWN DOWN...
Page 49 IR Sensor Schematic Diagram C4054 RS4051 RS-272 (REMOTE SENSOR) R4051 R4052 6.8K TO DIGITAL MAIN R4054 CN4052 CBA UNIT CN3103 5 REMOTE 4 AL+3.3V 3 P-ON+5V C4051 C4056 C4052 OPEN 1000P 2 LIGHT 1 GND C4055 OPEN IC4051 CPS295JT (LIGHT SENSOR) R4055 SW IOUT R4057...
Page 50 LED Schematic Diagram C4021 D4022 CL-840S-WT-SD-TS POWER TO DIGITAL MAIN CN4021 CBA UNIT CN3103 1 P-ON+5V 2 GND 3 LED1 C4022 LED CBA UNIT 10-15 PL16.29SCL...
Page 51: Wiring Diagram
WIRING DIAGRAM SP3801 SP3802 SPEAKER SPEAKER L-CH R-CH CL3801 CN3103 CN4001 HDMI- CONNECTOR-1 CN3801 CL3103 FUNCTION CBA UNIT HDMI- CONNECTOR-2 CN4052 HDMI- CONNECTOR-3 IR SENSOR CBA UNIT HDMI- SIDE CONNECTOR-4 CN4021 HEADPHONE JACK LED CBA UNIT DIGITAL AUDIO-OUT (OPTICAL) USB JACK DIGITAL MAIN CBA UNIT AC CORD COMPONENT...
Page 52: Exploded Views
EXPLODED VIEWS LCD1 LC3901 Digital Main CBA Unit IR Sensor CBA Unit B17-2 CL3801 B138 MB27 B138 B138 CL3602 SP3801 LED CBA Unit A7 A8 B17-1 SP3802 Function CBA Unit CL3103 Power Supply CBA Unit AC101 SSK1 See Electrical Parts List L73 L45 for parts with this mark.
Page 53 Packing Packing Tape S I D S I D SSK1 Fixlon Tape Tape 65PFL6621/F7 Fixlon Tape Packing Tape Some Ref. Numbers are not in sequence. 12-2 PL16.29-A_PEX...
Page 54: Parts List
PARTS LIST [65PFL6601/F7 (Serial No.: DS1)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a Ref. No. Description Part No. # have special characteristics important to safety. SSK1 STAND SCREW KIT A6182UH(SEMS-SW PAN 2ESA03459 BLACK_NI + M4X14.0) Before replacing any of these components, read...
Page 55 Electrical Parts PRODUCT SAFETY NOTE: Products marked with a MSW ASSEMBLY # have special characteristics important to safety. Ref. No. Description Part No. Before replacing any of these components, read MSW ASSEMBLY A6182MSW-001 carefully the product safety notice in this service Consists of the following manual.
Page 56 Don't degrade the safety of the product through improper servicing. NOTE: Parts that are not assigned part numbers (---------) are not available. Different parts from the original model 65PFL6601/F7 (Serial No. : DS1) Ref. No. Description Part No. A15#...
Page 57 C..±0.25% D..±0.5% F..±1% G..±2% J..±5% K..±10% M..±20% N..±30% Z..+80/-20% Different parts from the original model 65PFL6601/F7 (Serial No. : DS1) Ref. No. Description Part No. DIGITAL MAIN CBA UNIT A618AMMA-003 CN3101 WIRELESS LAN MODULE AMB7220 UWLMDLACM007 IC3102 IC NAND FLASH 8GB TH58NVG3S0HTA00B4H QSCA0R0TS168...
Page 58 PARTS LIST [65PFL6621/F7 (Serial No.: DS2)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.
Page 59 Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTES: 1.
Page 60 PARTS LIST [65PFL6601/F7 A (Serial No.: DS2)] Mechanical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing.
Page 61 Electrical Parts PRODUCT SAFETY NOTE: Products marked with a # have special characteristics important to safety. Before replacing any of these components, read carefully the product safety notice in this service manual. Don't degrade the safety of the product through improper servicing. NOTES: 1.
Page 62: Revision History
Chassis PL16.29 • 2016/06/17 65PFL6601/F7 (Serial No.: DS1) First draft added • 2016/08/23 65PFL6621/F7 (Serial No.: DS1) First draft added • 2016/09/21 65PFL6621/F7 (Serial No.: DS2) First draft added • 2016/11/11 65PFL6601/F7 A (Serial No.: DS2) First draft added 14-1 PL16.29REV...
Page 63 COMPARISON LIST OF MODEL NAMES Chassis PL16.29 65PFL6601/F7 (DS1) A6182UH 65PFL6621/F7 (DS1) A618AUH (DS2) A618CUH 65PFL6601/F7 A (DS2) A6186UH PL16.29COM...

This manual is also suitable for:

65pfl6621/f7 65pfl6601/f7 a 65pfl6601

Philips 65PFL6601/F7 Service Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Philips 65PFL6601/F7

Summary of Contents for Philips 65PFL6601/F7

This manual is also suitable for:

Table of Contents