SPIKECAM SC02 Manual

Dear customer,
Thank you for ordering our SC02 body camera. To ensure proper use of this product,
please read the manual carefully and keep it for future reference. We have also prepared
a few minutes of video tutorials that can be accessed by visiting
https://www.spikecam.com/sc02
questions, please contact our customer service by Amazon message at
info@spikecam.com, and we will respond within 24 hours.
For your convenience, we have compiled a list of common problems that users may
encounter while using this camera. Please review them before using the camera.
I am unable to power on the camera by pressing the power button.
1.
First, please ensure that your camera has remaining battery.
⚫
⚫ Release the Power Button and try pressing it again for more than 3 seconds. If it still
doesn't work, press the small RESET button (No.7) on the back with a pin a couple
of times and try again.
How do I export video to my computer?
2.
⚫ Connect the camera to your computer using a USB cable and enter the default
password "000000" by pressing the Confirm Button to unlock the camera's memory
card. The camera will then turn into a USB disk driver on the computer, and you can
copy files from it.
Does the camera support night vision?
3.
⚫ Yes, you can turn on auto night vision by pressing the FN button (No.13).
How do I turn on the SOS light and siren?
4.
⚫ In standby mode, hold the Audio button for 2-3 seconds to turn on/off the SOS
Alarm. Hold it again to stop the SOS siren. Hold it once again to stop the flashing
SOS Alarm LEDs.
How do I playback video files?
5.
You can use the 2-inch screen to playback video/audio/photo files. Hold the menu
⚫
Body Camera, Protect Ourselves
or by scanning the QR code below. If you have any