Makita PF400MP Original Instruction Manual
Pump attachment
Hide thumbs
Also See for PF400MP:
- Original instruction manual (269 pages) ,
- Instruction manual (96 pages) ,
- Original instruction (33 pages)
Subscribe to Our Youtube Channel
Related Manuals for Makita PF400MP
Summary of Contents for Makita PF400MP
- Page 1 ORIGINAL INSTRUCTION MANUAL MANUEL D’INSTRUCTIONS ORIGINAL MANUAL DE INSTRUCCIONES ORIGINALES Pump Attachment Accessoire de pompe Accesorio de Bombeo PF400MP IMPORTANT: Read Before Using. IMPORTANT : Lire avant usage. IMPORTANTE: Lea antes de usar.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model: PF400MP Capacities *1 Maximum lift height (High speed) 14.0 m (45.9 ft.) Maximum lift height (Medium speed) 11.0 m (36.1 ft.) Maximum lift height (Low speed) 6.0 m (19.7 ft.) 145 l/min (38.3 gpm) 140 l/min (37.0 gpm) 95 l/min (25.1 gpm) - Page 3 If the machine The goggles must comply with ANSI Z87.1 in is damaged, ask Makita Authorized Service the USA, EN 166 in Europe, or AS/NZS 1336 Centers for repair.
- Page 4 If the parts are worn or damaged, replace them with parts provided by Makita. Store the machine in a dry place out of the Electrical and battery safety reach of children.
-
Page 5: Parts Description
Service ASSEMBLY repair person using only identical replacement parts. WARNING: Before assembling or adjusting tool is maintained. Never service damaged battery packs. Service the battery cartridge. manufacturer or authorized service providers. WARNING: When assembling or adjusting SAVE THESE INSTRUCTIONS. the equipment, always put it down. Assembling or WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace... - Page 6 Turn the lever toward the attachment. on the pipe is aligned with the hole on the pump head. Fig.6 1. Lever Align the pin with the arrow mark on the power Make sure that the position line is on the tip of the arrow mark on the power unit, and the arrow mark on the power unit and the arrow mark on the pipe are facing each other.
-
Page 7: Operation
To remove the pipe, turn the lever toward the attach- Installing the hose ment and pull the pipe out while pressing down the release button. NOTICE: When installing or removing the hose, be careful not to splash water inside the hose on the operator or the power unit. - Page 8 NOTE: pump attachment on them. stopped. Fig.12 NOTE: Be aware that pumping large amounts of will shorten the life of the pump attachment. NOTICE: Do not insert the pump attachment deeper than the limit mark on the pipe. Doing so Fig.14 NOTE: water surface, be aware that water will continue to...
-
Page 9: Maintenance
Inspection MAINTENANCE CAUTION: WARNING: Before inspecting or maintaining any abnormality with the impeller. Failure to do so the battery cartridge. • Overall inspection WARNING: When inspecting or maintaining Check for damaged parts. Ask our authorized the equipment, always put it down. Assembling or Check the impeller for chipping, deformation, WARNING: Follow the warnings and precau-... -
Page 10: Troubleshooting
Contact an authorized service center for repairs. Contact an authorized service center for repairs. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita other accessories or attachments might present a risk ment for its stated purpose. Center. NOTE: 10 ENGLISH...
Need help?
Do you have a question about the PF400MP and is the answer not in the manual?
Questions and answers