BUY-RITE Milan NIN-MDN-01 Assembly Instructions

Double sided styling station

Download this manual

Assembly Instructions

Milan Double Sided Styling Station

NIN -

Model #

MDN-01

Important Safety Instructions

Please read all instructions carefully before assembling

this styling station.

For your safety, assembly by two or more adults is

strongly recommended.

Keep these instructions for future use.

Use only vedor supplied hardware to assemble this

product. Using unauthorized hardware could jeopardize

the structural integrity of the item and avoid the warranty.

Pre-Assembly

Remove all parts and hardware from the box. Place

them on a scratch-free work surface, as this will avoid

damaging parts during assembly.

To avoid accidentally discarding small parts or hardware,

do not dispose of any packaging or contents of the

shipping carton until assembly is complete.

Use the parts and hardware list on page 2 to identify and

separate all the pieces included.

The illustrations provided allow for easier assembly

when used in conjunction with the assembly instructions.

The use of power tools to aid in assembly is not

recommended. Power tools can damage hardware and

split wood.

Need help?

Do you have a question about the Milan NIN-MDN-01 and is the answer not in the manual?

Page 1 Assembly Instructions Important Safety Instructions Please read all instructions carefully before assembling this styling station. For your safety, assembly by two or more adults is strongly recommended. Keep these instructions for future use. Use only vedor supplied hardware to assemble this product.
Page 2 PARTS LIST** Care Instructions Description Part Sketch Long Phillips Head Bolt - Often dust the styling station parts using a clean, soft, Short Phillps Head Bolt (Only for Wheels) dry and lint free cloth. Wood Dowel - Blot spills immediately and wipe with a clean, damp cloth. Wheel with brake - We do not recommend the use of chemical cleansers, Wheel without brake...
Page 3 3-Mounting the Mirror panels 4-Handle Attachment 1) Rotate the mirror panel such that the holes in the back of the panel are aligned 1) For shipping, the drawer handles are attached to the insides of the drawer faces. with the holes in the front faces of the bottom and top cabinet sections. Using a Phillips head wrench, remove the 2 screws in each and reattach the handles on the front of the drawers.
Page 4 Finished Station with Mounted Shelves 5-Mounting Front Shelf and Back Shelf from the back of the metal shelf. Remove the Phillips head bolts (Part H) 2) Align the shelf with the holes in the front of the station and attach the screws from behind the mirror panel on the inside of the station.