Lionel POWERHOUSE 190 Quick Start Manual

POWERHOUSE 190
G
ive your railroad the power it deserves. PowerHouse generates a
brawny 190 watts (10.5 amps) of alternating current. Designed for use
with the PowerMaster™ Power Distribution Center and the CAB-1™
WARNING: When using electrical products, follow these basic safety precautions:
• Read these instructions thoroughly before using this device.
• The Powerhouse unit is not recommended for children under eight
years of age.
• Parents should periodically inspect the PowerHouse unit for
potential hazards and have it repaired if necessary by an
Authorized Lionel Service Center.
• PowerHouse is intended to be used indoors. Do not use if water is
present. Serious or fatal injury may result.
• Do not use the PowerHouse for anything other than its intended
purpose. This unit was designed to operate with PowerMaster and
select Lionel controllers only.
• PowerHouse was designed to operate on 120-volt, 60-Hz power.
Do not connect to any other source of power.
™
POWER SUPPLY
CAUTI O N — ELECTRI C ALLY
OPERATED PRODUCT:
NOT RECOMMENDED FOR CHI L DREN UNDER EI G HT YEARS OF AGE.
AS WITH ALL ELECTRIC PRODUCTS, PRECAUTIONS SHOULD BE
OBSERVED DURI N G HANDLI N G AND USE TO REDUCE THE RI S K OF
ELECTRI C SHOCK.
TRANSFORMER RATI N GS— I N PUT :120 VAC 60 HZ ONLY.
AC OUTPUT :21 V, 190 VA
Remote (each available separately) for dependable remote-control of your
railroad's electrical needs. Your PowerHouse includes an on-off switch
and circuit breaker reset button.
• Do not operate the PowerHouse unit with a damaged cord, plug,
or case.
• To avoid the risk of electrical shock, do not disassemble the unit.
There are no user-serviceable parts inside. If damaged, take the
PowerHouse to an Authorized Lionel Service Center. A list of
Authorized Service Centers is included.
• CAUTION: Do not operate your railroad unattended. Obstructed
accessories or stalled trains may overheat, resulting in damage to
your railroad.
• If the circuit breaker trips, turn the PowerHouse unit OFF. Reset
the circuit breaker, then turn the power ON and resume operation.
Resetting the circuit breaker during operation may cause the train to
surge forward.
• Unplug the PowerHouse from the power source when not in use.
71-2983-250
3/99