Bosch Vivatmo pro How-To

Initial setup

Hide thumbs Also See for Vivatmo pro:

Download this manual

Sales Folder | Setup Vivatmo pro

Vivatmo pro

Initial setup of a new Vivatmo pro – How to

First steps with your Vivatmo pro

The setup of the Vivatmo pro system includes the setup up of the handheld and the basestation. Please note that this

document does not replace the instructions for use. Therefore, please take time to carefully read the instructions for use

before using the Vivatmo pro.

Please also inspect the basestation, the handheld, the disposable mouthpiece and its pouch before usage. Do not use any

defective or accessories to avoid malfunction or hazardous situations and contact

service team

Setting up the handheld

1. Open the battery compartment on the back of the handheld.

2. Pick the handling tab with two fingers and insert the rechargeable battery into the battery

compartment. Mind the triangle marks on the battery and inside the battery compartment.

3. Apply the battery cover.

4. Remove protective cap and place the handheld on the basestation cradle for charging.

Charge before first use. The recharging time for a completely exhausted battery is about 12 hours. As long as the LED

is blinking blue, the handheld is charging.

5. Press the ON/OFF button to turn on the handheld. You see all screen icons and the system performs a brief self-test.

Then the software version on the handheld is shown.

6. Turn off the device before you replace the battery.

your local distributor or our customer

MDQ-01.733-01-EBA-170-02

1 | 3

Need help?

Do you have a question about the Vivatmo pro and is the answer not in the manual?

Page 1 First steps with your Vivatmo pro The setup of the Vivatmo pro system includes the setup up of the handheld and the basestation. Please note that this document does not replace the instructions for use. Therefore, please take time to carefully read the instructions for use before using the Vivatmo pro.
Page 2 Make sure the basestation is connected to a suitable power supply. If necessary, please use a suitable adapter for your country. The Vivatmo pro basestation starts automatically. When you start your Vivatmo pro basestation for the first time, you will be guided through a setup procedure of 5 simple steps, which helps you to enter all the required settings.
Page 3 Wait until the scan procedure is completed. You see the list of active handhelds. If no handheld is active, you see the message: “No handhelds available”. Compare the number of the Vivatmo pro handheld in ▪ the list with the serial number beneath the symbol on the handle of the handheld.