Download Print this page

Advertisement

Quick Links

Quick Reference
P6
Ver. 1.0 / 09-2016
© MAXX GmbH, 2016. All rights reserved. Printed in Germany

Advertisement

loading
Need help?

Need help?

Do you have a question about the P6 and is the answer not in the manual?

Questions and answers

Summary of Contents for Maxx P6

  • Page 1 Quick Reference Ver. 1.0 / 09-2016 © MAXX GmbH, 2016. All rights reserved. Printed in Germany...
  • Page 2: How To Program

    HOW TO PROGRAM The menu structure is similar to a directory tree and is split up in main menus and submenus. NOTE: Please note that not all menu items of this manual are absolutely relevant for your device. According to the supplied equipment, these may differ! Assignment and function of keys The apparatus is interactively programmed by the user.
  • Page 3 Structure of Main Menus STATUS/STOP START PROGRAMS CHANGE IN CURRENT BOTTLE MANUAL SAMPLING IN BOTTLE X SAMPLING DATA TEMPERATURE DATA MEASURING DATA DATA MEMORY BOTTLE PROTOCOL BOTTLE ARCHIV COMPONENT TEST OUTPUTS TEMPCARD DIGITAL INPUTS DIAGNOSIS/TEST ANALOG INPUTS VERSION INFO IP-ADDRESS DATE/TIME SYSTEM SETTINGS SETTINGS...
  • Page 4 GENERAL TROUBLESHOOTING AND ERROR MESSAGES Symptom Possible cause Action / Solution Battery is not charged. Replace with a fully charged battery. Replace battery or use the AC power Battery does not hold charge. supply. Replace the controller (PLC) or Defective controller (PLC). contact the service center.
  • Page 5: Error Messages

    DISTRIBUTOR Symptom Possible cause Action Distributor not programmed in Program (see operating instructions) software Cabling problem, broken wire or Check connections loose wire No function test motor output 49/50. If defective Power board defective, replace the board Motor or gear defective Replace distributor drive unit Forked light barrier defective Replace distributor drive unit...