Table of Contents
Advertisement
Intel (R) SpeedStep(tm) tech.
Intel (R) SpeedStep(tm) tech. is Intel's new power saving technology.
Processor can switch between multiple frequency and voltage points to
enable power savings. The default value is [Auto]. Configuration options:
[Auto], [Enabled] and [Disabled]. If you install Windows
[Auto], you need to set the "Power Schemes" as "Portable/Laptop" to en-
able this function. If you install Windows
function, please set this item to [Enabled]. This item will be hidden if the
current CPU does not support Intel (R) SpeedStep(tm) tech..
Please note that enabling this function may reduce CPU voltage and lead to system
stability or compatibility issue with some power supplies. Please set this item to
[Disable] if above issue occurs.
On-Demand Clock Modulation
This provides the On-Demand Clock Modulation duty cycle. It indicates the
clock on to clock off interval ratio. For example, if you set this option to
[75.0% On], your processor will work normally 75% of the time, and spend
the other 25% slacking off. Configuration options: [Auto], [Disabled],
[12.5% On], [25.0% On], [37.5% On], [50.0% On], [62.5% On], [75.0% On]
and [87.5% On]. The default value is [Auto].
3.4.2
3.4.2 Chipset Configuration
3.4.2
Chipset Configuration
Chipset Configuration
Chipset Configuration
3.4.2
3.4.2
Chipset Configuration
Advanced
Chipset Settings
Memory Remap Feature
DRAM Frequency
DRAM tCL
DRAM tRCD
DRAM tRP
DRAM tRAS
Primary Graphics Adapter
Internal Graphics Mode Select
DVMT Mode Select
DVMT/FIXED Memory
Onboard HD Audio
Front Panel
OnBoard Lan
DRAM Voltage
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Memory Remap Feature
Use this item to enable or disable memory remap feature. Configuration
options: [Enabled] and [Disabled]. The default value is [Disabled].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may also
select other value as operating frequency: [333MHz (DDRII667)] and [400MHz
(DDRII800)].
3 0
3 0
3 0
3 0
3 0
Vista
®
BIOS SETUP UTILITY
ENABLE: Allow
[Disabled]
remapping of
[Auto]
overlapped PCI memory
[Auto]
above the total
[Auto]
physical memory.
[Auto]
[Auto]
DISABLE: Do not allow
remapping of memory.
[PCI]
[Auto]
[DVMT Mode]
[Maximum DVMT]
+ -
[Auto]
F1
[Auto]
F9
[Enabled]
F10
ESC
[Auto]
XP and select
®
and want to enable this
TM
Select Screen
Select Item
Change Option
General Help
Load Defaults
Save and Exit
Exit
Advertisement
Table of Contents
