Download Print this page

Boss Audio Systems MRC5 Installation Instructions

Hide thumbs Also See for MRC5:

Download this manual

Thank you for purchasing a BOSS Audio Systems product. Please read through

these instructions carefully so you will know how to install this product properly.

Package Contents

• 1x Marine radio cover

• 6x Pan head screws (M4 x 25mm)

and clip nuts

Introduction and Features

• Head unit installation opening (W x H): 7.18" x 2.11" (182.4 x 53.5 mm)

• Fits single DIN head units (W x H): 7" x 2.0" (178 x 51 mm)

• Marine radio cover dimensions (W x H x D): 9.09" x 4.02" x 1.92" (231 x 102 x 48.8 mm)

• UV-stabilized ABS plastic housing

• Impact-resistant ABS

• Door sealed with an EVA gasket for water resistance

Product Overview

Flip-up door

Screw hole for fixing

the radio cover

Removable plastic tab

Installation Instructions

• Sticky EVA gasket ring

• Warranty

Head unit installation opening

- 1 -

MRC5/ MRC5B

Marine Radio Cover

Need help?

Do you have a question about the MRC5 and is the answer not in the manual?

Page 1 MRC5/ MRC5B Installation Instructions Marine Radio Cover Thank you for purchasing a BOSS Audio Systems product. Please read through these instructions carefully so you will know how to install this product properly. Package Contents • 1x Marine radio cover • Sticky EVA gasket ring •...
Page 2 Installation Step 1 If your single DIN head unit does not fit in the center opening of the radio cover, use a proper tool to cut out the two tabs (ABS plastic) in the center opening. 2.11 ” Plastic tab Plastic tab Step 2 The head unit installation opening is 7.18”...

Mrc5b