ASROCK ALIVENF5-ESATA2 R3.0 User Manual page 42

TRAS
Use this to adjust TRAS values. Configuration options: [Auto], [5CLK], [6CLK],
[7CLK], [8CLK], [9CLK], [10CLK], [11CLK], [12CLK], [13CLK], [14CLK],
[15CLK], [16CLK], [17CLK], and [18CLK]. The default value is [Auto].
TRRD
Use this to adjust TRRD values. Configuration options: [Auto], [2T], [3T], [4T],
and [5T]. The default value is [Auto].
TRC
Use this to adjust TRC values. Configuration options: [11T] to [26T]. The
default value is [Auto].
TWR
Use this to adjust TWR values. Configuration options: [Auto], [3T], [4T], [5T]
and [6T]. The default value is [Auto].
TWTR
Use this to adjust TWTR values. Configuration options: [Auto], [1T], [2T] and
[3T]. The default value is [Auto].
TRWTTD
Use this to adjust TRWTTD values. Configuration options: [Auto], [2T], [3T],
[4T], [5T], [6T], [7T], [8T] and [9T]. The default value is [Auto].
TWRRD
Use this to adjust TWRRD values. Configuration options: [Auto], [0T], [1T],
[2T] and [3T]. The default value is [Auto].
TWRWR
Use this to adjust TWRWR values. Configuration options: [Auto], [1T], [2T]
and [3T]. The default value is [Auto].
TRDRD
Use this to adjust TRWTTD values. Configuration options: [Auto], [2T], [3T],
[4T] and [5T]. The default value is [Auto].
MA Timing
Use this to adjust values for MA timing. Configuration options: [Auto], [2T],
[1T]. The default value is [Auto].
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the
same node, or accross nodes, decreasing access contention.
4 2 4 2 4 2 4 2 4 2