VTech Stack and Slide Penguin Pals Instruction Manual page 9

1. Choose a surface on the wall
surrounding the bath where the
suction cup support unit can be
mounted securely. The area should
be clean and dry before suctioning
the unit to the wall. For better suction,
we suggest wetting the suction cups
before attaching them to the wall. Press the suction cups onto
the wall to secure the suction cup support unit. Once the unit is
attached to the wall, test the strength of the suction by pulling
gently on the unit. The suction cups may not stick properly to
textured tiles. We recommend that the unit be removed from the
wall after each use as the strength of the suction cups cannot
support prolonged use.
2. To remove the unit from the wall, pull
the tab on the suction cup and pull
the Stack and Slide Penguin Pals
gently.
ACTIVITIES
1. On/Off Button
Press the On/Off Button to turn
the unit on. You will hear sing-along
songs, fun phrases and melodies.
The light will flash with the sounds.
9
9
9