Meross MSS425F - Smart Wi-Fi Protector Manual

Installation Guide

1. Download the Meross app.
   

2. Plug MSS425F into an outlet near main Wi-Fi.*
   
   *Proximity to main Wi-Fi is required only during the initial setup process.
   *MSS425Fonly supports 2.4GHz networks.
3. Open Meross app and simply follow the setup wizard for configuration.
   
4. Relocate MSS425F into a desired outlet, no configuration required.

LED and Button Rules

FAQ

At Meross we strive to assure your satisfaction. We apologize for any inconvenience with the installation or operation of the surge protector and are happy to assist at support@meross.com.

1. What devices can I control with the Smart Surge Protector?
   You can control lights, fans, humidifiers, portable heaters and any small appliances in accordance with the MSS425F's specifications (up to 10A output).
2. What should I do when my Meross app is unable to control the added Smart Surge Protector?
   You can troubleshoot the following:
   • Check the main Wi-Fi's Internet connection.
   • Make sure that main Wi-Fi's password hasn't been changed.
   • Make sure your MSS425F is not too far from the main Wi-Fi.
   • Factory reset MSS425F and try to add it again.
3. How do I pair my Meross devices with Amazon Alexa or Google Assistant?
   Visit Account->Amazon Alexa or Google Assistant page within Meross app for pairing instructions.

Safety Information

• The device is recommended for use indoors and in a dry location only.
• The device shall be used within its published power rating on the instructions.
• Please contact seller for replacement if there is any damage caused by transportation.
• Please plug in the socket in proper condition and away from children.
• Please plug in the socket fully while using for safety concern.

Email: support@meross.com
Website: www.meross.com