Meross MSS210 - Smart Wi-Fi Plug Manual

Package Contents

1 x Smart Plug
1 x User Manual

LED and Button Rules

1. Power Button
   Press the button to turn the smart plug ON or OFF.
   To factory reset the smart plug, press and hold the button for 5 seconds until the LED flashes between amber and green.
2. Status LED
   Solid amber: Initializing/ Firmware upgrading
   Rapidly flashing green: Wi-Fi connecting
   Slowly alternating between amber and green: Ready to pair
   Solid green: Connected to home Wi-Fi/ Successfully paired
   Solid red: No internet connection
   OFF: Your receptacle is not powered on/ The smart plug is not turned on.

Installation Guide

1. Connect your smartphone or tablet to a 2.4 GHz Wi-Fi network.
2. Make sure your smart device is covered by strong Wi-Fi signal.
3. The smart device supports iOS 13/iPadOS 13 and later. In order to have better user experience, it is recommended that you upgrade your iOS or iPadOS to the latest version before pairing with the smart device.
4. Download the Meross app.

5. Launch the Meross app and log in to your account, or if you are a new user, tap Sign up to create a new account.
6. Tap the "+" icon to select the type of smart device you want to add, then you can just follow the setup wizard to finish configuration.
   
7. Relocation of the smart device does not require additional operations provided that it is on the same network with strong Wi-Fi signal.

NOTE:

1. As long as you finish configuration, you'll be able to manage the device in Apple Home app.
2. Find more at https://www.meross.com/support/.

Link to Google Assistant or Amazon Alexa

Set up the device in the Meross app first, then link it to voice assistants.

Link to Amazon Alexa
Go to Account → Amazon Alexa and allow Meross to link with Alexa.

Link to Google Assistant
Go to Account → Google Assistant and follow the step-by-step instruc tions to complete the linking process.

FAQ

At Meross, we strive to assure your satisfaction. Attached below is a non-exhaustive list of questions that users are mostly concerned about.

1. What devices can I control with Meross smart plug?
   You can control lights, fans, humidifiers, portable heaters, and other small appliances that are in conformity with the specifications of the smart plug (up to 13A output).
2. What should I do when the LED turns solid red?
   You can troubleshoot the following:
   • Check if your home Wi-Fi is working properly.
   • Make sure that you have disabled access control in your router and that the smart plug is not blocked by the router's firmware.
   • Factory reset your Meross smart plug and try to add it again.
3. Why is my Meross smart device not responding in the Apple Home app?
   This is an exisitng issue with Apple Home app. You need to exit and reboot your Home app to fix this problem.

Learn more at https://www.meross.com/support/faqs.

Safety Information

• It is recommended that this device is used indoors in a dry location only.
• The device shall be used within its rated power included in the product specifications on the package.
• Make sure the device is fully plugged in and kept out of reach of children for safety concern.

Email: support@meross.com
Website: www.meross.com