WYBOTICS Wybot S1 User Manual page 13

Robotic pool cleaner
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
7. After restarting, the machine will execute the corresponding cleaning
program according to the preset parameters
1. When using App, it needs to obtain Bluetooth use permission and
location permission of the mobile phone
2. App is suitable for ios14 and above, and Android 8.0 and above.
3. To obtain weather information in APP, you need to turn on Location
service.
Floating blocks
Attention:
1. Before installation, ensure that there is no water in the bonding
position.
2. There is adhesive on the back of the top floating block. When installing
the top floating block to the big cover, the edges of top floating block must
be glued properly. After 24 hours, the machine can be put into the pool for
work.
When it is difficult for the machine climb
the wall, it cannot clean the waterline,
and it tilts seriously when climbing the
wall, solve the problems according to the
figure. If the machine climbs the wall
normally, the following operations are
not
adhesive, two top floating blocks are
attached to the machine. Carry out
installation according to (Figure 6-1).
Figure 6-1
required.
After
12
removing
the

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wybot S1 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Related Products for WYBOTICS Wybot S1

This manual is also suitable for:

Wy 200

Table of Contents

Save PDF