Download Print this page

ZINK ZN37052-F Instruction Manual

Solar powered security light with integral pir

Advertisement

Quick Links

Solar Powered Security Light
with Integral PIR
Please take time to read this leaflet carefully and retain it for future reference.
• This solar light comprises a solar cell and an LED light source.
Light from the sun charges the unit during the day and at night the energy stored
is used to power the light.
• The light will remain on for 25-30 seconds each time the PIR is activated.
• No other power source or connections are required.
• An on/off switch is located on the side of the main body.
Turn on to activate light and PIR function.
Contents - Check the pack to make sure you have all the parts listed.
1 x solar powered light
2 x mounting screws and wall plugs
Fixing Instructions
1. Attach the mounting bracket to the wall using the mounting screws provided.
(see Siting instructions below.)
2. Hook the light onto the mounting bracket.
Siting Instructions
• Solar lights are designed for use outside in an open (un-shaded) location.
• The solar panel should be located where sunlight can fall directly on the unit.
Shadows from buildings, trees, walls, hedges or similar should be avoided, as these
will reduce the amount of light the solar panel can absorb affecting your light's
operational run time.
• Avoid locations where light from other sources will fall on the panel at night
(street lights, floodlights etc.) as this may prevent the light from turning on.
• The units can be left outside in the rain but should not be exposed to water jets or
immersed in any way.
• For optimum life, the solar panel should be protected from weather extremes such
as snow or frost.
• Do not position near direct sources of heat such as patio heaters or barbecues.
• Do not position near to products that send radio waves, as this may affect the lamp
operation.
• Ensure the location can take the full weight of the wall light.
• For best results install at a height of between 2-4 metres from the ground and such
that motion for detection is across (rather than towards) the PIR beam.
• The PIR has an operational range of between 3-5 metres.
User Instructions
INS ZN 37052 - F

Advertisement

loading
Need help?

Need help?

Do you have a question about the ZN37052-F and is the answer not in the manual?

Questions and answers

Gary
May 25, 2025

Not working fully charged brand new

Subscribe to Our Youtube Channel

Summary of Contents for ZINK ZN37052-F

  • Page 1 INS ZN 37052 - F Solar Powered Security Light with Integral PIR User Instructions Please take time to read this leaflet carefully and retain it for future reference. • This solar light comprises a solar cell and an LED light source. •...
  • Page 2 Mounting Diagram Care and Use • Periodically wipe clean with a soft dry cloth. Never use scourers, abrasives or chemical cleaners. • The solar panel lens should be cleaned periodically to ensure its efficiency is not reduced by dust and dirt. •...