Advertisement
The Rukus XL is powered from the rechargeable Li-ion battery charged by the solar panel or the AC adapter (included).
Charge On/Off
Charge standby switch. Turn 'Off' when unit not in use to conserve the battery life of the device.
Pressing and holding the button shows the condition of the Li-ion battery. The Li-ion battery (SW9) starts charging once the AC adapter is plugged in or when the solar panel is in direct sunlight.
The Rukus XL comes equipped with an AC adapter. Plug the AC adapter into the right socket labeled DC located under the rubber plug on the side of the Rukus XL. Plug the other end into an AC socket. With the AC adapter plugged in, the Rukus XL starts charging its Li-ion battery and is ready to play.
Press and HOLD the ON/OFF Power button for 3 seconds (until you hear the beep).
The smartphone or USB device starts charging once it is inserted into the USB port. When the Rukus XL's POWER is OFF it can still charge your device. Please be advised that leaving your device after it has received a full charge from the Rukus XL, if <charge> is still set 'ON', it will continue to drain the Rukus XL's internal battery.
Press the volume buttons, , to increase or decrease volume levels or control it on your Bluetooth® device.
Press the button to turn on Bass Boost.
The button switches between Bluetooth¨ device and AUX-input if there is a signal from the AUX-In port. The Bluetooth signal takes priority if there is a Bluetooth signal and an audioin signal at the same time. If the audio-in signal is present, the switching function of the 'AUX' button is available. The AUX light turns on when auxiliary input is being used.
Pressing the button switches from play to pause for the the Bluetooth device, or control it directly on your device.
Pressing these buttons, , selects previous track/next track with a short press; hold down to scrub forward/reverse or control it directly on your Bluetooth device.
A new rechargeable battery can be purchased by contacting us at www.etoncorp.com or by calling (US) 1-800-872-2228 or (Worldwide) 650-903-3866.
To ensure full warranty coverage or product updates, registration of your product should be completed as soon as possible after purchase or receipt.
Please go to http://http://www.etoncorp.com/productregistration to register your product.
To obtain service for your product, we recommend first contacting an Etón service representative at 800-872-2228 US, 800-637-1648 Canada or (650) 903-3866 for problem determination and trouble-shooting. If further service is required, the technical staff will instruct how to proceed based on whether the radio is still under warranty or needs non-warranty service.
If you need help, please contact us, Monday-Friday, 8:00 a.m.- 4:30 p.m., North American Pacific Standard Time.
US:
1-800-872-2228
CANADA:
1-800-637-1648
WORLDWIDE:
650-903-3866
FAX:
650-903-3867
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the rukus XL and is the answer not in the manual?
Questions and answers