Advertisement
Quick Links
Mini Digital Alarm Clock
with Timer and Magnetic Back
Model: W72432
DC: 053124
P OWER U P
1. Insert 1 "AAA" battery into your Clock.
2. Enter the Settings Menu to adjust the Time settings.
3. Position on a wall, cabinet, or desktop.
Hanging Hole
Magnet
Battery
Compartment
SE TTI NGS M E NU
Important: Press and release or hold than release one button at a
time when setting your clock.
1. Hold the
button to enter the Settings Menu.
3. Press the
button to adjust the flashing values. Hold to adjust
quickly.
4. Press the
button to confirm adjustments and move to the
next item or exit.
Settings Menu Order:
12/24 Format
Hour
Minutes
Seconds
•
•
•
Page 2
C USTOM D I SPLAY M OD ES
Press and release the
Time, and Stopwatch modes. Your clock will stay on the selection.
TIME
Magnet
STOP WATCH
The Stopwatch will count up from 0 to 9 hours, 59 minutes, and 59
seconds.
1. Press and release the
2. Press and release the
counting.
3. Hold the
button to reset the stopwatch to zero.
Counting Up
LOW B AT TE RY I N DI CATOR
When the Battery Indicator
the clock's battery.
button to toggle through Time, Alarm
ALARM TIME
STOPWATCH
button until Stopwatch shows.
button to start or stop the stopwatch
Reset
shows above the seconds, replace
Page 3
Advertisement
Related Manuals for La Crosse Technology W72432
Summary of Contents for La Crosse Technology W72432
- Page 1 4. Press the button to confirm adjustments and move to the next item or exit. LOW B AT TE RY I N DI CATOR Model: W72432 Settings Menu Order: When the Battery Indicator shows above the seconds, replace DC: 053124...
- Page 2 S PE C IF I CAT I ON S WARRA N TY IN FO La Crosse Technology Ltd. provides a 1-year limited time warranty on this product relating to 1. Press the button so Alarm Time shows. There will be an “AL”...
Need help?
Do you have a question about the W72432 and is the answer not in the manual?
Questions and answers
Does the W72432 light up? If it does. Light up how do I get it to light up? If it doesn’t, I’ll be taking it back to the store.
No, the La Crosse Technology W72432 does not have a backlight.
This answer is automatically generated
How do you get it to settings to put time in
To set the time on the La Crosse Technology W72432:
1. Hold the button for 3 seconds to enter the Settings Menu.
2. 12HR will flash. Press the button to choose between 12HR or 24HR format.
3. Press to confirm and move to the hour setting. The hour will flash. Press the button to adjust the hour.
4. Press to confirm and move to the minutes. The minutes will flash. Press the button to adjust the minutes.
5. Press to confirm and move to the seconds. The seconds will flash. Press the button to adjust the seconds.
6. Press to confirm and exit the settings.
Note: If no button is pressed for 10 seconds, the clock will exit the settings mode automatically.
This answer is automatically generated