ZINK Rye ZN34359-F Manual

Specification:
Voltage
Power factor
Wattage 10W PIR
Lumen
Lamp type
CRI
Material
Beam angle
Products size 103x169x51mm 160x207x52mm
Color Temp
Work Temp
Protection
Housing color
PIR Specification:
Power Source:220-240VAC
Power Frequency:50/60Hz
Rated load:MAX. 100W resistive load / MAX.10W Inductive load
Detection Range:90°
Detection Distance: 6-10m (adjustable)
Time Delay: min:10±5sec , Max:8±2min. (adjustable)
Ambient Light: 2-2000lux. (adjustable)
Detection Motion Speed:0.6-1.5m/s
Working Temperature Power:-10°C -- +40°
Installation Height: 1-3m
This product should be disposed of responsibly at the end of its life. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice
(Waste Electrical and Electronic Equipment Directive)
Helpline
If you receive this item with parts broken or missing, please telephone: 0333 0050077
Please have ready your name, address, tel. no., product reference, where purchased and parts required.
An answering service is in operation outside office hours and during busy periods. We regret that we are
unable to give advice on internal house wiring.
Cascade Holdings Ltd, Gorse Mill, Gorse Street, Chadderton, Oldham. OL9 9RJ
AC180-260V
>0.9
20W PIR 30W PIR 50W PIR
>80LM/W
SMD2835
>80
Aluminum Alloy
180 °
160x207x52mm 215x250x55mm
Daylight : 6500K
° °
-10 C ---- 40 C
IP65
Black
Rye Outdoor
Slimline LED Flood
With PIR
INS ZN 34359 34360 34361 34362 - F
Diagram:
Cable connection
LUX
SEN S TIME
- + - +
Bolts
Brackets
Important Safety Information
Do not wire this floodlight into the lighting circuit - use a switched fused spur.
Before installation and servicing, disconnect the electrical supply at the mains.
Carefully observe all instructions or warnings that are labelled on, or supplied with, your product.
This product is suitable for outdoor use. If in any doubt, consult a qualified electrician.
Aluminum Alloy
Tempered glass
10W IP65
PIR Sensor