Page 2
Please read this user manual first! Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
1 Safety Instructions This section includes the safety • The manufacturer assumes no instructions necessary to pre- responsibility for any damage vent the risk of personal injury or due to misuse or mishandling. material damage. • This appliance is intended to be used in household and sim- Our company shall not be held ilar applications.
• Electrical products are danger- • Damaged power cables should ous for children and pets. Chil- be replaced by the authorised dren or pets should not play service in order to prevent pos- with, climb on top or inside the sible danger.
the mains (fuse, switch, main • Make sure that the hoses as switch, etc.) shall be available well as the power cable are not on the electrical installation. folded, pinched or crushed • Do not touch the plug with wet after the product is fitted into hands.
Page 7
• Always wear personal protect- • Do not plug the product to ive equipment (gloves, etc.) loose, broken, dirty, greasy during product installation, sockets or sockets that has maintenance and repair. There come out their seats or sock- is a risk of injury. ets with a risk of water con- •...
• If a drier is to be placed on the • Do not place sources of igni- product, fix with a suitable con- tion (burning candle, cigar- nection apparatus obtained ettes, etc.) or sources of heat from the authorised service. (irons, furnaces, ovens, etc.) on •...
• Do not directly use dry clean- 2. Cut the power cable and dis- ing detergent and do not wash, connect it with the plug from rinse, spin or dry laundry con- the appliance. taminated with dry cleaning 3. Break the locking mechanism detergent.
Page 10
and clothes) or the ones that • If the drying programmes are are filled and damaged (e.g. interrupted (as a result of pro- Pillows or coats). There is a gramme cancellation or power risk of burns. failure), the laundry in the ma- •...
• If there is a problem that you • Do not use softener or anti- cannot solve using the inform- static agent unless recommen- ation given in the safety in- ded by the manufacturer. structions section, turn off and • Products such as softener unplug the machine and call an should be used in accordance Authorized Service.
• If you need to move the soap, detergent, gas, gasoline, product for cleaning, do not thinner, alcohol, varnish, etc. pull on the cover. The cover while cleaning. can break and cause injury! • Cleaning agents containing • Do not put hands, feet and solvents might reek poisonous metal objects under or behind fumes( for ex.
Page 13
or other wastes. Take them to the pack- aging material collection points designated by the local authorities. EN / 13...
4 Installation 4.1 Appropriate Installation Location Please read the “Safety Instruc- tions” section first! • Place the product on a hard and level floor. Do not place it onto a carpet with Your washing machine automatic- high pile or other similar surfaces. Pla- ally detects the amount of laundry cing on an improper floor shall cause placed inside when selecting a pro-...
Tilt the machine back slightly. Rest the tabs WARNING of Cover A against the lower panel. Com- Remove the transportation safety plete the assembly by rotating the cover. bolts before operating the product. • Cover B and the Cap are optional. If avail- Otherwise, the product will get able, attach cover B and the Cap.
WARNING Make sure that the cold water con- nection is performed correctly dur- ing the installation of the product. Otherwise, your laundry may come out as hot at the end of the wash- ing cycle and thus they may be worn.
4.6 Adjusting the Stands • If the current supply to the fuse or breaker in the house is less than 13 Amps, have a qualified electrician install WARNING a 13 amp supply. In order to ensure that the product • The voltage specified in the "Technical operates more silently and vibra- specifications"...
2. Disconnect the water outlet and water Never carry the product without the main connections. 3 Drain all the water shipping bolts properly attached! that remains in the product. See Drain- Your product is so heavy that it ing Remaining Water and Cleaning the shall not be carried by one person.
5.3 Tips for Energy and Water Saving 5.5 Loading the Laundry Following information will help you use the 1. Open the loading door. product in an ecological and energy/water- 2. Put the laundry items into the product in efficient manner. a loose manner.
) there is a liquid detergent apparatus The loading door is locked while a for liquid detergent use in the main wash- programme is running. The door ing compartment. lock will open once the programme is completed. If the inner part of the Detergent, Softener and Other Cleaning machine is very hot at the end of Agents...
Page 22
• Please review the programme descrip- • Clean with water at its place or by remov- tions part for suggested programme for ing from its place when it is necessary. different textiles. Do not forget to place the apparatus in •...
• Wipe the inside of the product with a • As bleach may cause skin irritation use damp and clean cloth after using starch. only small amounts (1/2 tea cups - ap- proximately 50 ml and rinse the laundry Using Anti-Limescale well.
Page 24
Powder and liquid deter- It may be necessary to gents recommended for pre-treat the stains or per- colours can be used at form prewash. dosages recommended Prefer liquid deter- Liquid detergents Powder and liquid deter- for heavily soiled gents produced suitable for colours gents recommended for clothes.
tected by the machine. And if the detected programme duration increased automatic- load is higher than half load; washing pro- ally. You can follow this change on the dis- gramme will be adjusted accordingly and play. 6 Operating the Product Please read the “Safety Instruc- tions”...
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration information 4 Door lock is engaged symbol 5 Programme follow-up indicator 6 No Water indicator 7 Add Garment Indicator 8 Bluetooth Connection Indicator 9 Remote Control Indicator 10 Delayed Start Enabled Indicator 11 Drying Level Indicator 12 Child Lock Enabled symbol...
6.4 Selection of Washing Program Symbols shown on the display are schematic and may not match with 1. Determine the programme suitable for the product one-to-one. the type, quantity and soiling level of the If you do not want to perform dry- laundry in accordance with "Programme ing process after the programme and consumption table".
Page 29
be washable at 40 °C or 60 °C in a single Do not load more than 1 double cycle and dries them so that they can be fibre duvet (200 x 200 cm). put in a cupboard immediately. Do not wash your duvets, pillows and etc.
** When you select the drying function with covers such as gore-tex etc. It makes sure the Shirts programme, do not load your ma- your garments are washed gently thanks to chine with more than laundry than recom- special rotating movements. mended below: Otherwise wrinkles or hu- •...
Temperature Adjustment button Spin Speed Adjustment button only only works backwards. For ex- works backwards. For example, if ample, if you want to select 60°C you want to select 1000 rpm while while 40°C is written on the display, 800 rpm (cycle/min) is written on you need to press the button sev- the display, you need to press the eral times until you reach 60°C, go-...
• Cotton Dry In programmes that do not allow the drying setting, when the Drying Use this programme to dry cotton laundry with a dry weight of up to 6 kilograms. You auxiliary function button is pressed, can only dry in this programme. the drying light will not change and a warning noise will be heard.
Use this programme for fast hygienic clean- Clean and Wear programme is de- ing of your cotton or synthetic dry clothes signed to quickly wash and dry with hot air. daily clothes that have been worn for a short time and are not heavily Hygienic Ventilation programme contaminated.
Page 35
You can see the washing duration on the display of your machine while selecting a programme. De- pending on the amount of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours between the duration shown on the display and the actual dura- tion of the wash cycle.
Cottons 1400 04:00 2,000 Synthetics 1200 02:35 1,100 Quick / Su- 1400 00:28 0,250 per Quick Eco 40-60 + 1400 09:45 3,750 74,5 Cupboard 1400 07:10 2,013 46,5 The consumption values given for programs other than the wash and dry cycle with the Eco 40-60 program are in- dicative only.
If the selected wetness level (Iron • Remote Control Dry, Cupboard Dry, Cupboard Extra You can use this auxiliary function button Dry) cannot be reached at the end to connect your product to smart devices. of the drying programme, your ma- For detailed information, see HomeWhiz chine automatically extends the Feature and Remote Control Function.
Page 38
This is not a washing programme. • Child Lock This is a maintenance programme. Use Child Lock function to prevent children Do not turn this programme on from tampering with the machine. Thus you when there is something inside the can avoid any changes in a running pro- machine.
To deactivate bluetooth connection: When drying a small amount of laundry (maximum 2 items), the timed drying steps Press and hold Remote Control function in Cotton or Synthetic dry programmes button for 3 seconds. Countdown “3-2-1” should be selected. will be displayed, and then Bluetooth icon If the laundry is not at the desired dryness will disappears on the display.
Additional laundry can be added into the machine during the End Time countdown. At the end of the countdown, End Time indicator turns off, washing cycle starts and the time of the selected pro- In order for the End Time function is activ- gramme appears on the display.
If the Remote Control Function is selected, the door will be locked. In order to open the door you must de- activate Remote Start Function by either pressing the Remote Start button or changing the programme position. 6.16 Changing the Selections After Opening the loading door in case of power Programme has Started failure:...
Switching the machine to pause mode: If you turn the programme selection Press the Start/Pause button to switch the knob when the Child Lock is en- machine to pause mode. Pause symbol will abled, the programme will not be flash on the display. cancelled.
6.20 HomeWhiz Feature and Remote In order to use the HomeWhiz func- Control Function tion, the application must be in- stalled on your smart appliance, HomeWhiz allows you to use your smart and your washing machine must be device to check your washing machine and paired with your smart appliance get information about its status.
Page 44
Control Function button simultaneously Your washing machine will auto- for 3 seconds to switch your machine to matically turn off if you cannot real- HomeWhiz setup mode. ize the setup successfully within 5 minutes. In this case, you have to start the setup process all over again.
6.20.3 Remote Control Function and Using It After HomeWhiz setup, bluetooth will auto- matically turn on. To activate or deactivate the Bluetooth connection, please see “Bluetooth 3”. If you turn off and on your machine while bluetooth is active, it will automatically re- HomeWhiz Application may require connect.
of your washing machine. Once access is Once you activate this function on the established to the product, you will see a washing machine, it will remain enabled screen similar to the one below. apart from certain conditions and allow you to control your washing machine remotely via bluetooth.
3. Rinse drawer and syphon in the sink Use only a soft and damp cloth to clean the with plenty of warm water. Use gloves control panel. Do not use cleaning products or suitable brush to prevent contact of that contain bleach residues in the drawer with your skin.
In addition, prior to transporting the product 3. Follow the below procedures in order to (e.g., when moving to another house) water drain water. should be drained completely. If the product does not have an emergency water draining hose, in order to drain the NOTE: water: Foreign substances left in the...
Page 49
lection button or pressing and holding • Pump filter is clogged. >>> Clean the the On/Off button for 3 seconds to can- pump filter. cel the program. Previous programme Product stopped shortly after the pro- will be cancelled. See Cancelling the Pro- gramme started.
Page 50
• Input temperature of water is low. >>> • The product will not spin if water is not Required time to heat up the water ex- drained completely. >>> Check the filter tends in cold seasons. Also, washing and the draining hose. time can be lengthened to avoid poor •...
Page 51
• Detergent was put in the wrong compart- • Draining hose is folded. >>> Check the ment. >>> Put the detergent in the correct drain hose. compartment. Do not mix the bleaching Laundry became stiff after washing. (**) agent and the detergent with each other. •...
Page 52
• The detergent in the main wash compart- Foam is overflowing from the detergent ment got wet while taking in the prewash drawer. water. Holes of the detergent compart- • Too much detergent is used. >>> Mix 1 ment are blocked. >>> Check the holes tablespoonful softener and ½...
Therefore, unless otherwise authorized in by professional repairers (who are not au- the “Self-Repair” section below, repairs thorized by Beko ) shall void the guaran- shall be addressed to registered profes- tee. sional repairers in order to avoid safety is- sues.
Page 54
, might give raise to safety issues not attributable to sup- port.beko.com , and will void the warranty of the product. Therefore, it is highly recommended that end-users refrain from the attempt to carry...
Page 55
If you have purchased an American style Fridge freezer, the standard guarantee starts from the date of original purchase of the product, and lasts for a period of twenty four (24) months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product in writing.
Page 56
11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only. Does Beko offer replacements? This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new product instead of carrying out a repair. Where a replace- ment is offered, this would normally be an identical model but when this is not possible, a model of similar specification will be provided.
Page 57
In order to activate the 10 year parts guarantee you MUST register the appliance within 90 days of the original purchase date. You can register by visiting our websites. For UK customer visit beko.co.uk/register or phone 0800 497 0732. For ROI customers visit beko.ie/register or phone 1800 911 690. Our Beko branded appliances carry FREE replacement parts for the first 10 years, provided they are fitted by our Service Representatives, at the ap- plicable labour charge.
Page 58
The repair is guaranteed for 12 months for the same defect. In the unlikely event that the appliance is beyond economical repair we may at the sole discretion of Beko plc offer you an appliance at a reduced price. Our call out fee will still apply.
Page 59
Contact Us and choose a product support topic from the list of options. Complete the required details and click send message. Product registrations For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit beko.ie/register. EN / 59...
Need help?
Do you have a question about the B5D510645U and is the answer not in the manual?
Questions and answers