Para Mobility Pelican Pool and Spa Hoist Installation & Maintenance Manual

Pelican
®
Installation &
Service Pool
& Spa Hoist
Maintenance
Guide
The Pelican Pool and Spa Hoist has been manufactured in Australia and built to Australian
Standards. It is important to regularly check over your pool hoist and associated products
from Para Mobility on a regular basis.
The Pelican Pool and Spa Hoist is manufactured from 316 stainless steel. 316 stainless steel
is a corrosion resistant alloy; however, it may display rusting characteristics under certain
conditions such as in plant rooms or if the hoist is used in an indoor environment.
Following are some guidelines to assist you in developing a maintenance schedule for
your hoist.
• Routinely wipe down all surfaces of the hoist, using fresh water (not
chlorinated). This will minimise the potential build-up of corrosion
or rust like symptoms such as tea staining.
• In the event the equipment displays stubborn
stains or heavy deposit build up, specialised
cleaning materials may be needed to remove
foreign substances and restore the original
finish.
• Always use the supplied cover when not in use.
• If you have a sling or aquatic wheelchair,
regularly check the straps and stitching are
not frayed or damaged. Ensure the SWL sticker
remains on the chair. Check for any damage
to the fabric or the frame of the chair.
• It is imperative that servicing is carried
out a least annually by Para Mobility Pelican
Installation & Service or one of its qualified service agents.
®
Phone 1300 444 600
Pelican Installation & Service
®
Delivery, installation + servicing Australia wide
enquiries@paramobility.com.au
www.paramobility.com.au