Cpu Configuration - ASROCK 4CORE1600TWINS-P35D - V1.0 User Manual

3 . 3 . 1 CPU Configuration

3 . 3 . 1 3 . 3 . 1 CPU Configuration CPU Configuration CPU Configuration
3 . 3 . 1 3 . 3 . 1 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
Overclock Mode
[Auto]
CPU Frequency (MHz) [400]
PCIE Frequency (MHz) [100]
Boot Failure Guard [Enabled]
Spread Spectrum [Auto]
Ratio Status Unlocked (Min:06, Max:Unlimited)
Ratio Actual Value 8
Enhanced Halt State [Disabled]
[Enabled]
Intel Virtualization tech.
[Enabled]
CPU Thermal Throttling
[Disabled]
No-Excute Memory Protection
[Enabled]
Hyper Threading Technology
[Auto]
Intel (R) SpeedStep(tm) tech.
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual]
and [I.O.T.]. The default value is [Auto]. If you select [Manual], Untied
Overclocking function is enabled. Please refer to page 42 for the details of
Untied Overclocking Technology. If you select [I.O.T.] (Intelligent Overclocking
Technology), you are allowed to adjust the CPU frequency and PCIE frequency
in the following two items. Therefore, the system will automatically enable the
overclocking function when your CPU is heavy loaded.
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This item should always be [Auto] for better system stability.
Ratio Status
This is a read-only item, which displays whether the ratio status of this
motherboard is "Locked" or "Unlocked". If it shows "Unlocked", you will find an
item Ratio CMOS Setting appears to allow you changing the ratio value of
this motherboard.
Ratio Actual Value
This is a read-only item, which displays the ratio actual value of this
motherboard.
Select the over clock
mode.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
4 6 4 6 4 6
4 6 4 6