Ide Configuration - ASROCK 4CORE1600-D800 - V1.0 User Manual

ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows

3 . 3 . 4 IDE Configuration

3 . 3 . 4 3 . 3 . 4 3 . 3 . 4 3 . 3 . 4 IDE Configuration IDE Configuration IDE Configuration IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
[Enhanced]
ATA/IDE Configuration
SATAII 1
SATAII 2
SATAII 3
SATAII 4
IDE1 Master
IDE2 Slave
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
ATA/IDE Configuration
Please select [Compatible] when you install legacy OS (Windows
native OS (Windows 2000 / XP) is installed, please select [Enhanced].
®
When [Compatible] is selected
Combined Option
It allows you to select between [SATA 1, SATA 2, SATA 3, SATA 4], [SATA 1,
SATA 3, IDE 1], and [IDE 1, SATA 2, SATA 4]. If it is set to [SATA 1, SATA 3,
IDE 1], then SATAII_2 and SATAII_4 will not work. Likewise, if it is set to [IDE
1, SATA 2, SATA 4], then SATAII_1 and SATAII_3 will not work.
Because Intel
under legacy OS (Windows
2, SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], or [IDE 1, SATA 2, SATA 4]
when the installed device is used with legacy OS.
[SATA 1, SATA 2,
SATA 3, SATA 4]
SATAII_1,
Master
SATAII_2
SATAII_3,
Slave
SATAII_4
Vista certification.
® TM
Set [Compatible]
when Legacy OS
(MS-DOS, Win NT)
is used.
[Hard Disk]
Set [Enhanced]
[Not Detected]
when Native OS
[Not Detected]
(Win 2000/XP)
[Not Detected]
is used.
[Not Detected]
[Not Detected]
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
ICH7 south bridge only supports four IDE devices
®
NT), you have to choose [SATA 1, SATA
®
[SATA 1, SATA 3,
IDE 1]
SATAII_1
SATAII_3
3 3 3 3 3 3
3 3 3 3
NT). If
®
[IDE 1, SATA 2,
SATA 4]
SATAII_2
SATAII_4