Hardware Health Event Monitoring Screen; Boot Screen - ASROCK 4CORE1333-VIIV - V1.0 User Manual

3.4

3.4 Hardware Health Event Monitoring Screen

3.4 Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen
3.4 3.4 Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU fan
speed, chassis fan speed, and the critical voltage.
Main Advanced
Hardware Health Event Monitoring
CPU Temperature
M / B Temperature
CPU Fan Speed
Chassis Fan Speed
Vcore
+ 3.30V
+ 5.00V
+ 12.00V
CPU Quiet Fan
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
CPU Quiet Fan
This item allows you to identify the temperature of CPU fan. Configuration
options: [Disabled] and [Enabled]. The default value is [Disabled]. You are
allowed to enable this function only when you install 4-pin CPU fan.
3.5 3.5

3.5 Boot Screen

3.5 3.5 Boot Screen Boot Screen Boot Screen Boot Screen
In this section, it will display the available devices on your system for you to config-
ure the boot settings and the boot priority.
Main Advanced
Boot Settings
Boot Settings Configuration
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Hard Disk Drives
Removable Drives
CD/DVD Drives
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot Security
H/W Monitor
Target Fan Speed
Fast
: 37 C / 98 F Middle
Slow
: 31 C / 87 F
: 3400 RPM
: N / A
: 1.629V
: 3.306V
: 5.067V
Select Screen
: 11.890V
Select Item
F1 General Help
[Disabled]
F9 Load Defaults
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
H/W Monitor Boot Security
Configure Settings
during System Boot.
[1st Floppy Device]
[HDD: PM - HDS722580VL]
[CD / DVD: 3S - CD - ROM C]
[USB]
Enter Go to Sub Screen
F1
F9
F10
ESC
6 5 6 5 6 5
6 5 6 5
Exit
Exit
Select Screen
Select Item
General Help
Load Defaults
Save and Exit
Exit