Venstar T5800 Update Instructions

Touchscreen thermostat

Hide thumbs Also See for T5800:

Download this manual

The ﬁrst step in updating your thermostat is

to install the ColorTouch Assitant software on

your computer. Please navigate to

http://venstar.com/

to download the latest Skyport ColorTouch

Firmware" link:

Click the "Click here" link. If your computer

has trouble downloading the program, please

note that the Manual Install option is available.

When the ColorTouch Assistant web page loads,

click the "Download & Install" button.

Page 1

UPDATE INSTRUCTIONS

In order to update the Venstar T5800/T6800 TouchScreen Thermostat

with VR 2.03* or earlier you will need to have the following items:

1. A computer with an active internet connection

2. A blank SD card

3. An SD card reader (most computers have this built-in)

4. An installed and powered T5800/T6800

*Thermostats with ﬁrmware 2.04 or later may download new ﬁrmware via a wi-ﬁ

connection using the ACC0454 Skyport Wi-Fi Key.

and click the "Click here

www.venstar.com

Need help?

Do you have a question about the T5800 and is the answer not in the manual?

Page 1 UPDATE INSTRUCTIONS In order to update the Venstar T5800/T6800 TouchScreen Thermostat with VR 2.03* or earlier you will need to have the following items: 1. A computer with an active internet connection 2. A blank SD card 3. An SD card reader (most computers have this built-in) 4.
Page 2 Click the “Install Now” button. If your computer has trouble downloading the program, please note that the ColorTouch Manual Install option is available. Assistant v2.10.1 In the pop-up dialog, click the Open button. The CTA program should launch and be installed on your computer.
Page 3 To download the latest ﬁrmware onto your SD card, click on the “New Thermostat Conﬁguration” button and select the T5800 or T6800 model. Click the “Save to SD” button to automatically download a blank ﬁle to your SD card with the new ﬁrmware for your thermostat.
Page 4 To download the latest ﬁrmware onto your T5800/T6800 thermostat, insert the SD card with the new ﬁrmware into the SD card slot on the side of the thermostat. Now press the MENU button on the bottom right and navigate to “Page 2 of 2”...

T6800