Time of day
Setting the time
Minute timer
After connecting to the mains, or after a power
0:00
failure, the display
>
Press the
button and set the current time with
the rotary knob (e.g.
To correct the time, press the
symbol flashes.
Then set the time.
Note: The time cannot be corrected if an automatic
function or the timer has been set (to cancel see
"Electronic clock").
>
1.
Press the
button until the
symbol flashes, and set the time you want
5
(e.g.
minutes).
When the timer switches on, the remaining time
is displayed.
2.
When the time has elapsed, a signal is emitted
,
and the
symbol flashes. To stop the signal,
>
press the
button.
will blink.
15:00
hours).
>
button until the
,
15