Page 2
Informations générales Customer support Cambox ensure to give the best support for customers. You can contact us by va email at hello@cambox.eu or or on our online chat on www.cambox.eu Registered brands and patents The CAMBOX brand and all its derivatives are registered trademarks protected by international laws on copyright. ...
Table of contents Your Cambox To start Fasten your Cambox Set the viewing angle For more information and to access our support pages, Play your content Click on below button : Charge the battery Connect your smartphone Access to support...
Your Cambox Do not remove the rubber tab Status LED : Memory card slot - green LED : 2K resolution On/Off button // Record/Pause - blue LED : FullHD 1080 resolution - white LED : HD720 resolution - orange LED : wifi activated/connected ...
Cambox is on. The pause mode is automatically activated (solid LED) BZZZ Make a quick impulse If your Cambox switches of few seconds after being turned on : ⚠ 1) the battery is not charged enough 2) the memory card is absent...
Page 6
Record From the pause mode, press the ON/OFF button of your Cambox. Pause Press the ON/OFF button of your Cambox when the recording is on. The One simple push Cambox emits 1 vibration and the LED becomes solid. The recording is paused The calmera vibrates and the LED starts flashing every second, indicating...
Maker sure that the velcro fastener support is in good condition and that there is no foreign ⚠ The wings of the Cambox can only be folded vertically (up to down). Make sure not to fold matter that could hinder the fastening of your camera. In that case, plan the replacement of them from front to back to prevent damages to the shell of your Cambox.
Adjust the lens Check the viewing angle The central part of the Cambox has a tipper that allows you to modify the In order to define accurately the desired viewing angle, download and viewing angle by 35°. The selection of the angle is made easy and install our application on your smartphone to check in real time your maintained thanks to its integrated notches system.
Via Wifi Make sure the Cambox is turned off. Enable the Wifi and launch the application on your smartphone Plug the USB cable between your Cambox and your computer, it will automatically detect a new drive. Via the memory card Push briefly on the memory card to remove it...
We advise to keep charging your Cambox for 30min - 1h after the Then, plug in the USB cable and connect it to a power outlet LED has switched off ⚠ To optimize the lifespan of the battery, we advise not to charge the Cambox for more than 12h straight...
Page 11
It takes about 1h30 to fully charge the battery via a 230V USB power outlet The charger that you use to charge your Cambox must meet below conditions* : Input (towards the charger) The charging time might be longer if you plug the Cambox to •...
« CAMBOXV3PLUS » then enter the default password. antenna. Password One quick push Once the connexion is set, the orange LED will become solid. Your Cambox will then display a flashing orange LED, indicating the antenna is activated and the network is detectable. IMPORTANT ! ⚠...
1) Make sure you did not open the app before pairing the phone and the camera 1) The Cambox can enter a safety mode in case of 2) Refresh the wifi networks on your smartphone (it excessive temperatures (-5°C to 55°C)
The user is fully responsible for its uses. Be careful recycling must be in accordance with local environment regulations, when using your Cambox as part of your sports activities. Pay see “ Recycling” above.) If the recording function as not been used attention to what is going on around you to avoid hurting you or for some time, make sure to fully charge the camera before using it.
Need help?
Do you have a question about the V3+ and is the answer not in the manual?
Questions and answers