Advertisement
Quick Links
Intelligent energy saving DC technology
With LED (-L) model
Images are for reference only and may vary slightly from actual product.
Ceiling Fan Installation Manual V2.0
MODELS:
SKY
WH
Thank you for purchasing this quality Ventair DC ceiling fan. To ensure correct function and safety,
please read all instructions before using the product and keep all instructions for future reference.
MUST BE
CAUTION
DIY
INSTALLED BY
Read Instructions Carefully
A LICENSED
For Safe Installation and Fan
ELECTRICIAN
Operation
Advertisement
Related Manuals for Skyfan DC SKY1303WHC2
Summary of Contents for Skyfan DC SKY1303WHC2
- Page 1 Intelligent energy saving DC technology With LED (-L) model Images are for reference only and may vary slightly from actual product. Ceiling Fan Installation Manual V2.0 MODELS: Thank you for purchasing this quality Ventair DC ceiling fan. To ensure correct function and safety, please read all instructions before using the product and keep all instructions for future reference.
- Page 2 Only a licensed electrician should complete the installation. WARNING: Light and fan must be connected to the same phase. Before servicing, ensure both light and fan circuits are disconnected.
- Page 3 Unpack the fan carefully and identify all parts. Please refer to Fig 1. Skyfan WITH LIGHT Skyfan WITHOUT LIGHT Fig 1. Mounting bracket x 1 Mounting bracket x 1 Pre-assembled fan motor, down rod, canopy Pre-assembled fan motor, down rod, canopy and bottom cover x 1 and LED light x 1 Blades x 3...
- Page 4 ove moto ove moto ove moto • • operation. (Fig.6 • • PLEASE NOTE: void the warranty. • For structures other than wood, the appropriate screw type MUST be used. • Move motor housing canopy downward until covering the motor.
- Page 5 screws provided are for use with wooden structures NOTE: The bracket fixing screws provided are for use with wooden structures using canopy downward until covering the motor housing using canopy downward until covering the motor housing. screws are designed specifically for this purpose, and use of other types of sc screws are designed specifically for this purpose, and use of other types of sc screws provided are for u NOTE: The bracket fixing screws provided are for u...
- Page 6 Below is an example / guide for the electrical installer for maintaining wiring to the Skyfan DC’s terminal block. g point. g point. STEP 2. Prepare the Heat shrink tubes with the same length and place over the 20-30mm single sheath insulatio g point.
- Page 7 • own below, so that only the 5mm own below, so that only the 5mm fitinto the terminal block . See Step nto the terminal block . See Step • • • wires wires • Fig. 7.1. Fig. 7.2. • •...
- Page 8 Fan Models Without Light 1. Turn wall switch to ‘ON’ an is now in standby mode. A ‘beep’ will be heard. Fan ‘ON’ and ‘OFF’ If your fan has a light, the light will illuminate in default setting Forward - downdraft for cooling (summer mode) Reverse - updraft for heat circulation (winter mode) of 100% brightness in (NW) atural...
- Page 9 The Skyfan DC remote control comes pre-paired at the factory and is ready to use. Pairing will only be required in situations mentioned below. 1. Using 1 remote handset to control 2 or more Skyfan DC Ceiling fans • Choose the fan you wish to pair with your handset.
-
Page 10: Care And Cleaning
AC type ceiling fan motors. The Skyfan DC Range are one of the quietest fans available and are ideal for all areas of the home especially bedrooms where noise is a crucial consideration. - Page 11 Rated Ceiling Fan Fan Weight Rated Voltage Power Rated Power (Lamp) Model (Kg) (Motor) 220-240 VAC 220-240 VAC 20W, LED, 3000K, 4000K, 5000K...
- Page 12 • If you consider there are faults relating to the installation, contact your installer to rectify. • If you consider there is a manufacturer defect to the fan motor, contact the warranty service line on 1300 665 926, or submit a warranty claim at www.ventair.
Need help?
Do you have a question about the SKY1303WHC2 and is the answer not in the manual?
Questions and answers